819064
27
Zoom out
Zoom in
Previous page
1/56
Next page
5 Operation
5.1 To set the product to ON
WARNING: Read and understand the
safety chapter before you use the product.
Push the ON/OFF button for 3 seconds to set the
product to ON. Make sure that the LED indicator
comes on.
5.2 To start the product
1. Push the ON/OFF button for 3 seconds to set the
product to ON.
2. Open the Husqvarna Fleet Services app.
3. Enter the PIN code.
4. Push the START button on the product.
5.3 To select operation mode
5.3.1 Scheduled operation
The product operates to the set schedule in the work
area where it cuts the grass and charges automatically.
5.3.1.1 To select scheduled operation in the app
1. Open the app on your mobile device.
2. Select
Start
>
Resume Schedule
.
5.3.1.2 To select scheduled operation in the control
panel
1. Push the STOP button.
2. Push the Play button.
3. Push the START button.
5.4 appDrive
Use the appDrive to operate the product manually.
5.4.1 To use appDrive
1. Open the app on your mobile device.
2. Select
Start
>
appDrive
.
5.4.2 To operate the product with appDrive
Use the buttons to operate the product:
Use the up button (A) to move the product forward.
Use the down button (B) to move the product
rearward.
Use the left arrow button (C) to rotate the product
to the left.
Use the right arrow button (D) to rotate the product
to the right.
Use the center button (E) as a joystick to move and
rotate the product in any direction.
A
D
B
C
E
Note: Walk 2-3 m / 6.5-9.8 ft. behind the product
when you operate the product with appDrive.
5.5 Work area selection
This function lets the product temporarily operate in a
selected work area. When the selected work area is cut,
the product continues to operate to the set schedule.
For the product to operate in a secondary area, you
must move the product manually to and from the
secondary area. The product operates until the work
area is cut or until the battery is empty.
5.5.1 To select the work area in the app
1. Open the app on your mobile device.
2. Select
Start
.
3. Select the work area.
5.6 Operation mode Park
The operation mode
Park
means that the product goes
back to the charging station. The product stays in the
charging station for a selected period of time or until you
select a new operation mode.
1691 - 006 - 09.01.2023 Operation - 27
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Ceora 544 EPOS - 2023 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Ceora 544 EPOS - 2023 in the language / languages: English as an attachment in your email.

The manual is 14.14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Ceora 544 EPOS - 2023

Husqvarna Ceora 544 EPOS - 2023 User Manual - German - 60 pages

Husqvarna Ceora 544 EPOS - 2023 User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info