819064
23
Zoom out
Zoom in
Previous page
1/56
Next page
Operate the product counterclockwise around the
boundary of the stay-out zone.
Add waypoints on the map. Add the waypoints
minimum 3 cm / 1 in. from obstacles.
Do not set waypoints that make a virtual boundary
go across itself in the same stay-out zone.
Save the stay-out zone to automatically connect
the first and last waypoint with a virtual boundary.
To make a transport path
Operate the product and add waypoints on the
map to install a transport path. Start in a work area
minimum 1 m / 3.3 ft. from the virtual boundary.
Do not install a transport path across a stay-out
zone.
Do not set waypoints that make the transport path
go across the same transport path.
Operate the product and add waypoints to connect
the transport path to the docking point.
Save the transport path to automatically connect
the last waypoint to the docking point.
Set the corridor width (A) for the transport path.
The corridor width can be set to 3-5 m / 9.8-16.4 ft.
A
To make a maintenance point
Operate the product and add waypoints on the
map. Start to add waypoints at the position
where you install the maintenance point. The first
waypoint specifies the maintenance point.
Operate the product and add waypoints to make a
path to the charging station.
Save the maintenance point to automatically
connect the last waypoint to the docking point.
Set the corridor width (A) for the maintenance
point. The corridor width can be set to 3-5 m /
9.8-16.4 ft.
A
To reinstall the charging station on the map
Reinstall the charging station on the map if you move or
replace the charging station. You can also reinstall it if
the robotic lawn mower cannot dock or connect to the
charging station.
1. Select
map objects > Charging station
in the app.
2. Select
Reinstall charging station
and follow the
instructions.
To reinstall the reference station on the map
Reinstall the reference station on the map if you move or
replace the reference station.
1. Select
map objects > Reference station
in the app.
2. Select
Reinstall reference station
and follow the
instructions.
1691 - 006 - 09.01.2023 Installation - 23
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Ceora 544 EPOS - 2023 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Ceora 544 EPOS - 2023 in the language / languages: English as an attachment in your email.

The manual is 14.14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Ceora 544 EPOS - 2023

Husqvarna Ceora 544 EPOS - 2023 User Manual - German - 60 pages

Husqvarna Ceora 544 EPOS - 2023 User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info