734005
4
Zoom out
Zoom in
Previous page
1/78
Next page
BATTERY HANDLING
4 – English
can make a connection from one terminal to
another.
Shorting the battery terminals together may
cause burns or a fire.
Operation
The display shows the battery capacity and if there are
any problems with the battery. The battery capacity is
displayed for 5 seconds after the machine is switched off
or the battery indicator button is pressed.
(8)
The warning
symbol on the battery is lit when an error has occurred.
See fault codes.
(6)
When all the LEDs are lit on the battery, it is fully charged.
(7)
Regularly check that the battery charger and the battery
are intact.
The battery must be charged before using it the first time.
The battery is only 30% charged when delivered.
Put the battery in the battery charger. Make sure that
the battery is connected to the battery charger.
(1), (2)
The green charging light on the charger is lit when the
battery is connected to the battery charger.
(4)
When all LEDs are lit the battery is fully charged.
(7)
Remove the battery from the battery charger. Use the
battery in surroundings where temperatures are
between -10
°
C and 40
°
C.
NOTE!
During charging, monitoring the charging process and
never leave the battery in the charger when charging is
complete.
Transport and storage
The contained lithium-ion batteries are subject to the
Dangerous Goods Legislation requirements.
For commercial transports e.g. by third parties,
forwarding agents, special requirement on packing
and labeling must be observed.
For preparation of the item being shipped, consulting
an expert for hazardous material is required. Please
also observe possibly more detailed national
regulations.
Tape or mask off open contacts and pack up the
batteriy in such a manner that it cannot move around
in the packing.
Store the equipment in a lockable area so that it is out
of reach of children and unauthorized persons.
Store the battery and the battery charger in a dry,
moisture-free and frost-free space.
Store the battery where the temperature is between 5
°
C and 25
°
C and never in direct sunlight.
Be sure to store the battery separate from the battery
charger.
Do not store the battery in places where static
electricity can occur. Never store the battery in a metal
box.
Before longer storage please charge the battery.
Maintenance
Make sure the battery and battery charger are clean and
that the terminals on the battery and the battery charger
are always clean and dry before the battery is placed in
the battery charger.
Keep the battery guide tracks clean. Clean plastic parts
with a clean and dry cloth.
Fault codes
Troubleshooting the battery and/or the battery charger
during charging.
(5), (6)
The battery will not be charged if the battery
temperature is over 50
°
C. In that case the battery
charger will actively cool down the battery.
If the LED on the battery charger is lit solid red, the
battery charger requires a service.
Disposal of the battery, battery charger
and machine
Symbols on the product or its packaging indicate that this
product cannot be handled as domestic waste. It must
instead be submitted to an appropriate recycling station
for the recovery of electrical and electronic equipment.
By ensuring that this product is taken care of correctly,
you can help to counteract the potential negative impact
on the environment and people that can otherwise result
through the incorrect waste management of this product.
For more detailed information about recycling this
product, contact your municipality, your domestic waste
service or the shop from where you purchased the
product.
LED lights Battery status
All LEDs are lit
Fully charged (67%-
100%).
LED 1, LED 2 are lit.
The battery is 34%-66%
charged.
LED 1 is lit.
The battery is 1%-33%
charged.
LED 1 flashes.
The battery is empty.
Charge the battery.
LED display Possible faults Possible action
Error LED
flashing
Temperature
deviation.
Use the battery
in surroundings
where
temperatures
are between -10
°
C and 40
°
C.
Battery
discharged
Charging the
battery
Error LED is lit
Cell difference
too much (1V).
Contact your
service agent.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna BLi20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna BLi20 in the language / languages: All languages as an attachment in your email.

The manual is 13,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info