733901
19
Zoom out
Zoom in
Previous page
1/60
Next page
with this type of obstacle. However, obstacles
that slope slightly, for example stones or large
trees with raised roots, must be isolated or
removed. The product can run onto this kind of
obstacle causing the blades to be damaged. Use
the boundary wire to isolate areas inside the work
area by creating islands. When the boundary
wires to and from the island are put close
together, the product can run over the wire.
Note: To achieve careful and silent operation, it is
recommended to isolate all fixed objects in the
work area.
Put the boundary wire to and around the
obstacle to make an island.
Put the 2 sections of boundary wire that run
to and from the obstacle close together
without crossing.
Put the 2 sections of boundary wire in the
same stake.
0 cm / 0
"
3.4.3.4 To make a secondary area
Make a secondary area (B) if the work area has 2
areas that are not connected with a passage. The
work area with the charging station is the main
area (A).
Note:
The product must be manually moved
between the main area and the secondary area.
B
A
Put the boundary wire around the secondary
area (B) to make an island. Refer to
To
make an island on page 18
.
Note: The boundary wire must be put as 1
loop around all of the work area (A + B).
Note: When the product cuts grass in the
secondary area, the
Secondary area
mode
must be selected. Refer to
Operating mode -
Start on page 33
.
3.4.4 To examine where to put the guide
wire
Put the guide wire in a line at a minimum of
2 m / 7 ft. in front of the charging station.
Make as much free area as possible to the
left of the guide wire when facing the
charging station. Refer to
To examine where
to put the charging station on page 15
.
Put the guide wire minimum 30 cm / 12 in.
from the boundary wire.
Do not make sharp bends when you install
the guide wire.
135º
135º
90º
If the work area has a slope, put the guide
wire diagonally across the slope.
1439 - 002 -
Installation - 19
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna AUTOMOWER 520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna AUTOMOWER 520 in the language / languages: English as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna AUTOMOWER 520

Husqvarna AUTOMOWER 520 User Manual - German - 64 pages

Husqvarna AUTOMOWER 520 User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info