644636
31
Zoom out
Zoom in
Previous page
1/100
Next page
G3
G1
G2
3012-1123
3023-009
3023-010
English - 29
INSTALLATION
Laying and connecting the guide wire
1. Before laying and connecting the guide wire, it
is important to give consideration to the length
of the guide loop, especially in large or complex
installations. If the guide loop is longer than
400 meters, the robotic lawnmower can have
difculty following the guide wire.
The guide wire, together with the part of the
boundary loop that comprises the return to the
charging station, is called the guide loop. The
signal in the guide loop always goes to the left
at the connection from the guide wire to the
boundary wire. The two gures here display what
is regarded as a guide loop. The gures are
also a good example of how the guide loop in
an working area can have very varying lengths
depending on where the charging station is
placed.
2. Tilt the top cover on the charging station forward
and run the guide wire up the channel leading to
the guide connection.
3. Fit a connector to the guide wire in the same
way as for the boundary wire in 3.5 Connecting
the Boundary Wire. Connect it to the contact pin
on the charging station that is labeled G1. On
an installation where several guides are to be
connected, use G2 and G3 (Automower® 430X
and Automower® 450X).
4. Mark the wires with wire labels. This makes it
easier to reconnect the wires correctly when for
instance the charging station has been stored
indoors for the winter.
5. Run the guide wire straight under the charging
plate and then at least 2 meters straight out from
the front edge of the plate.
Consider when laying the guide wire that as much
space as possible is provided to the left (as seen
facing the charging station) of the guide wire.
The distance between the boundary wire and the
guide wire must always be at least 30 cm.
3023-011
Maximum
distance
Min 30 cm/12”
Min 2 m/7 ft
1157866-26,420,430X,450X,EN_160314.indd 29 2016-03-14 16:58:44
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna AUTOMOWER 450X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna AUTOMOWER 450X in the language / languages: English as an attachment in your email.

The manual is 14,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna AUTOMOWER 450X

Husqvarna AUTOMOWER 450X User Manual - English - 152 pages

Husqvarna AUTOMOWER 450X User Manual - German - 104 pages

Husqvarna AUTOMOWER 450X User Manual - Dutch - 100 pages

Husqvarna AUTOMOWER 450X User Manual - French - 104 pages

Husqvarna AUTOMOWER 450X User Manual - Italian, Portuguese, Spanish - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info