819078
21
Zoom out
Zoom in
Previous page
1/52
Next page
4 Settings
This chapter gives information about the settings for
the product that you can make in the Automower®
Connect app. All setting for the product are available in
Automower® Connect. Some settings can also be made
in Automower® Access, refer to
Automower® Access on
page 9
. The product has factory settings but the settings
can be adapted for each work area.
4.1 Schedule
In the
Schedule
menu you can change the schedule
settings for the product. You can set separate schedule
settings for each work area. Secondary areas cannot be
scheduled. The schedule function controls which hours
the product is permitted to operate. When the product
does not operate, it is parked in the charging station.
The shape of the work area, number of obstacles and
slopes decreases the mowing capacity.
To calculate the schedule setting for irregular mowing,
refer to
To calculate the schedule setting for irregular
mowing on page 21
.
4.1.1 To use systematic mowing
Set the schedule to let the product operate for as
long time as possible.
Note: When the product has cut the work area it
goes to the charging station. The product is parked
in the charging station until the next schedule
starts. If the work area is not fully cut, the product
continues to cut the work area with the next
schedule.
To cut a work area 2 times a day, you can set
2 different schedules. Set the schedule for the
product to have sufficient time to cut the complete
work area.
With 2 or more parallel schedules, the product
starts to cut where it has not cut for the longest
time.
4.1.2 To use irregular mowing
The product operates the complete scheduled time with
irregular mowing.
Decrease the scheduled time or use the
Weather
timer
function to prevent wear on the grass. Refer
to
Weather timer on page 22
.
If the cutting result is not satisfactory, increase the
scheduled time. Refer to
To calculate the schedule
setting for irregular mowing on page 21
.
With 2 or more parallel schedules in different work
areas, the product first starts to cut 1 work area.
After each charging of the product, the product
starts to cut another work area.
4.1.3 To calculate the schedule setting for
irregular mowing
1. Calculate the dimension of your lawn in m2 / ft2.
2. Divide the m2 / ft2 of the lawn with the approximate
operation capacity. Refer to table below.
3. The result is equal to the number of hours that the
product must operate each day.
Note: The operation capacity is approximate and is
calculated for flat and open work area. If the work area
has a lot of slopes or obstacles, you need to increase
the
Schedule
settings.
Model Approximate operation capaci-
ty, m2/h / ft2/h
Automower® 320 92 / 990
Automower® 430X 133 / 1430
Automower® 450X 208 / 2240
Example: A lawn of 1000 m2 / 10700 ft2, cut with an
Automower® 320.
1000 m2 / 92 ≈ 11 h.
10700 ft2 / 990 ≈ 11 h.
Days / week h / day Schedule settings
7 11 07:00-18:00 / 7:00
am-6:00 pm
4.2 Cutting height
4.2.1 Adjust the cutting height
The cutting height can be adjusted from 2 cm / 0.8 in. to
6 cm / 2.4 in.
CAUTION: The first weeks after a new
installation, the cutting height must be set to
6 cm / 2.4 in. to prevent damage to the loop
wire. The cutting height can then be lowered
each week.
2071 - 002 - 05.02.2024 Settings - 21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Automower 450X NERA - 2024 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Automower 450X NERA - 2024 in the language / languages: English as an attachment in your email.

The manual is 4.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Automower 450X NERA - 2024

Husqvarna Automower 450X NERA - 2024 Quick start guide - English, German - 8 pages

Husqvarna Automower 450X NERA - 2024 User Manual - German - 52 pages

Husqvarna Automower 450X NERA - 2024 User Manual - Dutch - 52 pages

Husqvarna Automower 450X NERA - 2024 Quick start guide - French, Italian - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info