819077
22
Zoom out
Zoom in
Previous page
1/52
Next page
4.2.2 TargetHeight
Use the TargetHeight function to lower the cutting height
from the maximum cutting height to the specified cutting
height gradually during 10 days. If you change the
cutting height manually during this time it will disable the
TargetHeight function.
4.3 Operation
In
Operation
you can change the operation settings of
the product.
4.3.1 Spiral cutting
Spiral cutting is only applicable for work areas with
irregular pattern. If the product enters an area where it
senses the grass is longer than average, it can change
the movement pattern to
Spiral cutting
. This means that
the product mows in a spiral pattern to faster cut the
area with longer grass. It is possible to set the intensity
of the
Spiral cutting
.
Very low / Low
intensity means
that
Spiral cutting
begins less often.
High / Very high
intensity means that
Spiral cutting
begins more often.
Note:
Spiral Cutting
does not start in slopes steeper
than 17%.
4.3.2 Object avoidance
Object avoidance
is only available for Automower®
430X/450X NERA.
The products senses objects on the lawn that is higher
than the grass with the
Object avoidance
function
enabled. When the product senses an object on the
lawn, the product turns and continues to cut in a
different direction. You can disable the
Object avoidance
function if it is unsatisfactory for your work area.
Note:
Object avoidance
can cause that the grass is
not cut around objects. The sensors can also sense high
grass or flowers in the work area as objects.
4.3.3 Weather timer
Weather timer
automatically adjust the cutting time to
the growth of the grass.
Weather timer
adjusts the
cutting time only for work areas with irregular pattern.
The product is not permitted to operate more than the
schedule settings.
Note: When using
Weather timer
, it is recommended
to make as much operating time as possible available
for
Weather timer
. Do not restrict the schedule more
than necessary.
The first operation of the day is set by the schedule
settings. The product completes 1 mowing cycle per
scheduled work area, then the
Weather timer
selects if
the product continues to operate.
Note:
Weather timer
is reset if the product does not
operate for more than 50 hours, or if a
Reset of all user
settings
is done.
Weather timer
is not changed if a
Reset
of schedule settings
is done.
4.3.4 ECO mode
ECO mode
disables the signal in the boundary wire,
guide wire and the charging station, when the product is
parked or is charging. The LED indicator of the charging
station flashes green when the loop signal is disabled.
Note: Use
ECO mode
to save energy and to prevent
interference with other equipment, for example hearing
loops or garage doors.
Note: To start the product manually in the work area
you must first enable the loop signal.
4.3.4.1 To enable the loop signal
1. Set the product to ON.
2. Put the product in the charging station.
3. Push the STOP button.
4. Wait 2 seconds and then remove the product from
the charging station.
5. Make sure that the LED indicator of the charging
station is solid green.
6. Put the product where you want it to start to cut.
22 - Settings 2071 - 002 - 05.02.2024
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Automower 430X NERA - 2024 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Automower 430X NERA - 2024 in the language / languages: English as an attachment in your email.

The manual is 4.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Automower 430X NERA - 2024

Husqvarna Automower 430X NERA - 2024 Quick start guide - English, German - 8 pages

Husqvarna Automower 430X NERA - 2024 User Manual - German - 52 pages

Husqvarna Automower 430X NERA - 2024 User Manual - Dutch - 52 pages

Husqvarna Automower 430X NERA - 2024 Quick start guide - French, Italian - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info