819071
36
Zoom out
Zoom in
Previous page
1/48
Next page
Message Cause Action
EPOS plug-in not
found
The EPOS Plug-in has been installed earlier,
but cannot be found.
Make sure that the EPOS Plug-in is installed
correctly and that the cable is connected. Re-
start the product. If the problem stays, speak
to your authorized service center.
Charging station
communication prob-
lem
The mower cannot communicate with the
charging station.
Create a new loop signal or reinstall your
charging station under map view in the app.
If the problem stays speak to your authorized
service center.
Power failure Find and correct the cause of the power fail-
ure.
Invalid firmware con-
figuration
The firmware in the product is not updated. Update the firmware to the latest version.
Map problem
The map object file is incorrect. Do a check of the map in the app. Adjust the
map and save it.
Delete the map and do a new installation.
Accessory power
problem
There is a power problem with the accessory
port.
Switch off the product and disconnect and re-
connect the accessory to the accessory port.
Restart the product. If the problem stays,
speak to your service center.
Destination not
reachable
The product cannot go to the destination be-
cause there is no guide wire or boundary
wire in the work area.
Edit or make a new installation of the work
area in the app and include a guide wire or a
boundary wire in the work area.
The product cannot go to the destination be-
cause of a stay-out zone.
Edit or remove the stay-out zone or make a
new installation of the work area.
Destination blocked
The product cannot go to the destination be-
cause of an obstacle.
Remove the obstacle.
Boundary wire prob-
lem
The boundary wire for the
Support by wire
function is damaged or not installed correctly.
Examine that the boundary wire is connected
correctly to the charging station. Examine all
the splices on the boundary wire. Examine if
the boundary wire is damaged and repair it if
it is necessary.
Accessory power
problem
There is a power problem with the accessory
port.
Set the product to OFF and disconnect and
connect the accessory to the accessory port.
Set the product to ON. If the problem stays,
speak to your service center.
Unexpected cutting
height adj
The cutting height adjustment cannot move. Examine the cutting height adjustment and
remove grass or other objects. If the problem
stays, speak to your approved servicing deal-
er.
Limited cutting height
range
Cutting height prob-
lem
Cutting system imbal-
ance
The product has discovered vibrations in the
blade disc.
Make sure that the blades and screws are
not damaged and worn. Make sure that all
blades are correctly installed and that there
is only one blade attached in each position
on the blade disc. Clean the blades and the
cutting disc.
36 - Troubleshooting 2369 - 001 - 05.02.2024
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Automower 410XE NERA - 2024 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Automower 410XE NERA - 2024 in the language / languages: English as an attachment in your email.

The manual is 4.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Automower 410XE NERA - 2024

Husqvarna Automower 410XE NERA - 2024 User Manual - German - 48 pages

Husqvarna Automower 410XE NERA - 2024 User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info