819083
25
Zoom out
Zoom in
Previous page
1/52
Next page
2. Use the arrow buttons and the OK button to
move through the menu structure
Weather timer
> Cutting time
.
3. Use the arrow buttons to select
Low, Mid
or
High
frequency.
4. Push the BACK button.
4.2.8 Installation
In the Installation menu it is possible to adapt the
settings of the product for best mowing result.
4.2.8.1 GPS Assisted Navigation, Lawn Coverage and
Systematic Passage Mowing
The
GPS Assisted Navigation
function helps the product
to select the most optimal operation. Use the
Lawn
coverage
function to do manual settings or to use the
function
Systematic Passage Mowing
.
If the work area includes remote parts that are
connected with narrow passages, the
Lawn Coverage
and
Systematic Passage Mowing
function are useful to
be able to maintain a well-cut lawn in all parts of the
yard. The
Lawn Coverage
function is used to guide
the product to remote parts of the work area. The
Systematic Passage Mowing
function is used for narrow
passage mowing. A guide wire must be installed to use
these functions. You can set a maximum of 3 remote
areas.
With the
Lawn Coverage
function the product first
follows and then leaves the guide wire after a certain
distance and starts to mow the lawn.
The
Systematic Passage Mowing
function is suitable
to mow narrow passages of 60 cm - 1.5 m / 23 in. -
4.9 ft. width. The product moves in a pattern to cover
the passage width. The product starts the
Systematic
Passage Mowing
at the set distance from the charging
station. When the product reaches the end of the narrow
passage, the product continues and cuts the lawn as
normal.
Area A, approximately 50%
Area B, approximately 30%
Area C, approximately 20%
A
C
B
To set the GPS Assisted Navigation
Disable the GPS Assisted Navigation to make manual
settings in
Lawn coverage
.
Note: It is recommended to use GPS Assisted
Navigation.
1. Do steps 1–3 in
To get access to the menu in the
display of the product on page 22
.
2. Use the arrow buttons and the OK button to move
through the menu structure
Installation > Lawn
coverage
.
3. Push the OK button to enble or disable the
function.
4. Push the BACK button.
To set the Lawn Coverage function
1. Do steps 1–3 in
To get access to the menu in the
display of the product on page 22
.
2. Use the arrow buttons and the OK button to
move through the menu structure
Settings > Lawn
Coverage > Area 1-3
.
3. Use the arrow button to select the area.
4. Push the OK button.
5. Measure the distance from the charging station
to the start of the area. Measure along the guide
wire. Refer to
To measure the distance from the
charging station on page 26
.
6. Push the arrow buttons to select the distance,
measured in m.
7. Push the OK button.
8. Use the arrow buttons to select the percentage of
the cutting time the product must cut the area. The
percentage is equal to the percentage of the area
in relation to the complete work area.
a) Measure the area.
1650 - 006 - 20.02.2023 Product settings - 25
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Automower 405X - 2023 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Automower 405X - 2023 in the language / languages: English as an attachment in your email.

The manual is 4.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Automower 405X - 2023

Husqvarna Automower 405X - 2023 User Manual - German - 56 pages

Husqvarna Automower 405X - 2023 User Manual - Dutch - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info