819076
12
Zoom out
Zoom in
Previous page
1/52
Next page
3 Installation
3.1 Introduction - Installation
Read this chapter to install the product with a boundary
wire. A boundary wire is not necessary if you install the
product with the EPOS. Read the operator's manual
for the reference station to install it with the product.
WARNING: Read and understand the
safety chapter before you install the product.
CAUTION: Use original spare parts and
installation material.
Note: Refer to www.husqvarna.com for more
information about installation.
3.2 Main components for installation
The installation involves the following components:
A robotic lawn mower that mows the lawn
automatically.
A charging station, which has 3 functions:
To send control signals along the boundary
wire.
To send control signals along the guide wire
so that the product can follow the guide wire
to specific remote areas in the garden and
can find its way back to the charging station.
To charge the product.
A power supply, which is connected to the
charging station and a 100-240V power outlet.
Loop wire, which is laid around the work area
and around objects and plants that the product
must not run into. The loop wire is used both as
boundary wire and guide wire.
3.3 To prepare for installation
Read the installation chapter before you start the
installation. Prepare the installation carefully to make the
product operate satisfactorily.
Make a blueprint of the work area and include all
obstacles. This makes it easier to examine where
to put the charging station, the boundary wire and
the guide wire.
Make a mark on the blueprint where to put the
charging station, the boundary wire and the guide
wire.
Make a mark on the blueprint where the guide wire
connects to the boundary wire. Refer to
To install
the guide wire on page 19
.
Fill in holes in the lawn to make it level.
CAUTION: Holes with water in
the lawn can cause damage to the
product.
For Automower® 320 NERA, make sure that
you have Wi-Fi coverage in the charging station
to download new firmware. Refer to
Download
firmware over the air FOTA (Firmware over the air)
on page 25
. For Automower® 430X/450X NERA
Wi-Fi or cellular technology is used for FOTA.
For Automower® 320 NERA, make sure that you
have Wi-Fi coverage in the work area if you use
the Automower® Connect app remotely. Refer
to
Automower® Connect app on page 17
. For
Automower® 430X/450X NERA Wi-Fi or cellular
technology is used for Automower® Connect.
Note: We recommend you to have Wi-Fi
coverage in the work area. If you have Wi-Fi
coverage, you can control and make settings
for the product remotely with the Automower®
Connect app. The product automatically connects
to Wi-Fi when it is in an area that has Wi-Fi
coverage.
Cut the grass and trim the edges before you install
the product. Make sure that the grass is maximum
10 cm / 3.9 in.
Note: The first weeks after installation the sound level
when the product cuts the grass can be higher than
usual. The sound level decreases after some time.
3.4 Before the installation of the wires
You can select to attach the wires with stakes or bury
them. You can use the 2 procedures for the same work
area.
CAUTION: If you use a dethatcher
in the work area, bury the boundary wire
and the guide wire to prevent them from
damage.
3.4.1 To examine where to put the charging
station
Keep a minimum 3 m / 10 ft. of free space in front
of the charging station. Refer to
To examine where
to put the guide wire on page 16
.
Keep a minimum of 150 cm / 60 in. of free space
to the right and left of the center of the charging
station.
Put the charging station near a power outlet.
12 - Installation 2071 - 002 - 05.02.2024
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Automower 320 NERA - 2024 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Automower 320 NERA - 2024 in the language / languages: English as an attachment in your email.

The manual is 4.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Automower 320 NERA - 2024

Husqvarna Automower 320 NERA - 2024 Quick start guide - English, German - 8 pages

Husqvarna Automower 320 NERA - 2024 User Manual - German - 52 pages

Husqvarna Automower 320 NERA - 2024 User Manual - Dutch - 52 pages

Husqvarna Automower 320 NERA - 2024 Quick start guide - French, Italian - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info