819079
20
Zoom out
Zoom in
Previous page
1/48
Next page
4 Settings
This chapter gives information about the settings for
the product that you can make in the Automower®
Connect app. All setting for the product are available in
Automower® Connect. Some settings can also be made
in Automower® Access, refer to
Automower® Access on
page 9
. The product has factory settings but the settings
can be adapted for each work area.
4.1 Schedule
In
Schedule
you can change the schedule settings for
the product.
The
Schedule
function controls which hours the product
operates. When the product does not operate, it is
parked in the charging station. You can see which hours
and days the product operates in the schedule overview
in the app.
You can set the Schedule if the work area is less
than the maximum area capacity of the product. This
prevents wear on the grass and the product. The factory
schedule setting lets the product operate around the
clock 7 days a week.
To calculate the schedule setting, refer to
To calculate
the schedule setting on page 20
.
4.1.1 To calculate the schedule setting
1. Calculate the dimension of your lawn in m2 / ft2.
2. Divide the m2 / ft2 of the lawn with the approximate
operation capacity. Refer to table below.
3. The result is equal to the number of hours that the
product must operate each day.
Note: The operation capacity is approximate and is
calculated for flat and open work area. If the work area
has a lot of slopes or obstacles, you need to increase
the
Schedule
settings.
Model Approximate operation capaci-
ty, m2/h / ft2/h
Automower® 320 92 / 990
Automower® 430X 133 / 1430
Automower® 450X 208 / 2240
Example: A lawn of 1000 m2 / 10700 ft2, cut with an
Automower® 320.
1000 m2 / 92 ≈ 11 h.
10700 ft2 / 990 ≈ 11 h.
Days / week h / day Schedule settings
7 11 07:00-18:00 / 7:00
am-6:00 pm
4.2 Cutting height
4.2.1 Adjust the cutting height
The cutting height can be adjusted from 2 cm / 0.8 in. to
6 cm / 2.4 in.
CAUTION: The first weeks after a new
installation, the cutting height must be set to
6 cm / 2.4 in. to prevent damage to the loop
wire. The cutting height can then be lowered
each week.
4.2.2 TargetHeight
Use the TargetHeight function to lower the cutting height
from the maximum cutting height to the specified cutting
height gradually during 10 days. If you change the
cutting height manually during this time it will disable the
TargetHeight function.
4.3 Operation
In
Operation
you can change the operation settings of
the product.
4.3.1 Spiral cutting
If the product enters an area where it senses the grass
is longer than average, it can change the movement
pattern to
Spiral cutting
. This means that the product
mows in a spiral pattern to faster cut the area with
longer grass. It is possible to set the intensity of the
Spiral cutting
.
Very low / Low
intensity means that
Spiral
cutting
begins less often.
High / Very high
intensity
means that
Spiral cutting
begins more often.
Note:
Spiral Cutting
does not start in slopes steeper
than 17%.
20 - Settings 2071 - 001 - 29.03.2023
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Automower 320 NERA - 2023 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Automower 320 NERA - 2023 in the language / languages: English as an attachment in your email.

The manual is 4.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Automower 320 NERA - 2023

Husqvarna Automower 320 NERA - 2023 Quick start guide - German - 8 pages

Husqvarna Automower 320 NERA - 2023 User Manual - German - 52 pages

Husqvarna Automower 320 NERA - 2023 Quick start guide - Dutch - 8 pages

Husqvarna Automower 320 NERA - 2023 User Manual - Dutch - 52 pages

Husqvarna Automower 320 NERA - 2023 Quick start guide - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info