579293
82
Zoom out
Zoom in
Previous page
1/92
Next page
English - 80
TROUBLESHOOTING
The robotic
lawnmower runs, but
the blade disc does
not rotate
The robotic lawnmower follows
a guide wire or boundary wire to
or from the charging station.
This behaviour is normal and no action is
required.
The robotic lawnmower searches for
a guide wire or boundary wire and
the battery charge is very low.
This behaviour is normal and no action is
required.
The robotic
lawnmower mows
for shorter periods
than usual between
charges
Grass or other foreign object blocks
the blade disc.
Remove and clean the blade disc. See 8.4
Cleaning on page 71.
The battery is spent. Contact your local dealer.
Both the mowing and
charging times are
shorter than usual
The battery is spent. Contact your local dealer.
The robotic
lawnmower often
moves in circles or
spirals
Spiral cutting is a natural part of the
robotic lawnmower’s movement.
Adjust how often spiral cutting shall be
performed. The function can be disabled if
necessary. See 6.9 Settings on page 59.
9.5 Finding breaks in the loop wire
Breaks in the loop wire are usually the result of
unintentional physical damage to the wire such as when
gardening with a shovel. In countries with ground frost,
also sharp stones that move in the ground can damage
the wire. Breaks can also be due to the wire being
stretched excessively during installation.
Mowing the grass too low right after the installation can
damage wire insulation. Certain damage to the insulation
may not cause disruptions until several weeks or months
later.
A defective splicing of the loop wire can also lead to
disruptions rst several weeks after the splice was done.
A faulty splice can, for example, be the result of the
original coupler not being pressed together hard enough
with a pair of pliers, or that a coupler of lower quality than
the original coupler has been used. Please rst check all
known splices before further troubleshooting is done.
OM_1157863-26_HQ 310,315,EN_160229.indd 80 2016-02-29 10:52:40
82


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-automower-310

Reset search

  • What number should I set Husqvarna 310 at for best cutting height? Submitted on 30-4-2023 at 16:52

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna AUTOMOWER 310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna AUTOMOWER 310 in the language / languages: English as an attachment in your email.

The manual is 12,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna AUTOMOWER 310

Husqvarna AUTOMOWER 310 User Manual - English - 152 pages

Husqvarna AUTOMOWER 310 Quick start guide - German - 8 pages

Husqvarna AUTOMOWER 310 User Manual - German - 92 pages

Husqvarna AUTOMOWER 310 Quick start guide - Dutch - 8 pages

Husqvarna AUTOMOWER 310 User Manual - Dutch - 92 pages

Husqvarna AUTOMOWER 310 Quick start guide - French - 8 pages

Husqvarna AUTOMOWER 310 User Manual - Italian, Portuguese, Spanish - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info