579293
35
Zoom out
Zoom in
Previous page
1/92
Next page
3012-1428
English - 33
INSTALLATION
3.8 First start-up and calibration
Before the robotic lawnmower is operated, a start-up
sequence in the robotic lawnmower’s menu must be
carried out as well as an automatic calibration of the
guide signal.
1. Open the control panel hatch by pressing the
STOP button.
2. Set the main switch to position 1.
A start-up sequence begins when the robotic lawnmower
is started for the rst time. The following is requested:
PIN code from factory. The code is provided on
a special document received by the retailer at
purchase.
Language.
Country.
Date.
Time.
Selection and conrmation of personal PIN code.
All combinations except 0000 are permitted.
Place the robotic lawnmower in the charging station and
press START.
The robotic lawnmower will now begin to calibrate the
guide wire. Press START and close the hatch. The
calibration is performed by the robotic lawnmower backing
out of the charging station and running a calibration
process in front of the charging station. When this is
completed, mowing can begin.
IMPORTANT INFORMATION
Use Memo on page 2 to make a note of the
PIN code.
3.9 Test docking with the charging
station
Before using the robotic lawnmower, check that the
robotic lawnmower can follow the guide wire all the way
to the charging station and easily docks with the charging
station.
The test function is found in the robotic lawnmower’s
Installation > Find charging station > Guide > More > Test
guide menu. For more information, See Test settings on
page 55.
If no guide wire is installed the test must be carried out on
the boundary wire, both clockwise and anti-clockwise.
The guide system must rst be calibrated if the above test
is to provide a satisfactory result. See 3.8 First start-up
and calibration on page 33.
OM_1157863-26_HQ 310,315,EN_160229.indd 33 2016-02-29 10:51:55
35


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-automower-310

Reset search

  • What number should I set Husqvarna 310 at for best cutting height? Submitted on 30-4-2023 at 16:52

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna AUTOMOWER 310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna AUTOMOWER 310 in the language / languages: English as an attachment in your email.

The manual is 12,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna AUTOMOWER 310

Husqvarna AUTOMOWER 310 User Manual - English - 152 pages

Husqvarna AUTOMOWER 310 Quick start guide - German - 8 pages

Husqvarna AUTOMOWER 310 User Manual - German - 92 pages

Husqvarna AUTOMOWER 310 Quick start guide - Dutch - 8 pages

Husqvarna AUTOMOWER 310 User Manual - Dutch - 92 pages

Husqvarna AUTOMOWER 310 Quick start guide - French - 8 pages

Husqvarna AUTOMOWER 310 User Manual - Italian, Portuguese, Spanish - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info