579268
74
Zoom out
Zoom in
Previous page
1/77
Next page
English - 75
9. TROUBLE SHOOTING
9.2 Fault symptom
If your Automower
®
does not work correctly, follow the trouble shooting guide below. If the fault persists;
contact your dealer.
Symptom Cause Action
Uneven mowing
results
Automower
®
works too few hours per
day.
Increase the mowing time, see 6.4
Timer (2) on page 47.
Working area too large. Try limiting the working area or
extending the working time, see 6.4
Timer (2) on page 47.
Dull blades. Replace all the blades and screws so
that the rotating parts are balanced.
Long grass in relation to the set cutting
height.
Increase the cutting height and then
successively lower.
The mower seems to work more at the
top of a slope than at the bottom.
Change the Garden shape (3-3)
setting to Open.
Accumulation of grass by the blade
disc or around the motor shaft.
Check that the skid plate and blade
disc rotate easily. If not, the skid plate
and perhaps the blade disc must be
removed and the grass and foreign
objects removed. See 8.5 Cleaning on
page 69.
Automower
®
runs at
the wrong time
The clock on Automower
®
needs to be
set.
Set the clock, see Time and date (4-4)
on page 60.
The start and stop times for mowing
are incorrect.
Adjust the start and stop time settings
for mowing, see 6.4 Timer (2) on
page 47.
Automower
®
vibrates Unbalanced blade disc or damaged
blades.
Inspect the blades and screws and
replace them if necessary.
Automower
®
runs, but
the blade disc does
not rotate
Automower
®
is looking for the charging
station.
No action. The blade disc does not
rotate when the mower is searching for
the charging station.
The mower mows for
shorter periods than
usual between
charges
Grass or a foreign object is blocking
the blade disc or skid plate.
Dismantle and clean the skid plate and
blade disc.
Both the mowing and
charging times are
shorter than usual
This behaviour is normal in high
temperatures (gradually increasing
above 25 °C).
No action.
Automower
®
starts
mowing directly
outside of the
charging station
instead of following
the loop out
Change corridor width and/or
reversing distance.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna AUTOMOWER 220 AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna AUTOMOWER 220 AC in the language / languages: English as an attachment in your email.

The manual is 4,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna AUTOMOWER 220 AC

Husqvarna AUTOMOWER 220 AC User Manual - German - 80 pages

Husqvarna AUTOMOWER 220 AC Additional guide - Dutch - 5 pages

Husqvarna AUTOMOWER 220 AC User Manual - Dutch - 80 pages

Husqvarna AUTOMOWER 220 AC User Manual - French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info