579268
53
Zoom out
Zoom in
Previous page
1/77
Next page
54 - English
6. MENU FUNCTIONS
Corridor width (3-2-3)
The Corridor width setting defines the distances
from the mower's path to the boundary wire or
the guide wire when following these to/from the
charging station. The area beside the wires used
by the mower is called the Corridor.
A low corridor width value represents a narrow
corridor while a high value represents a wide
corridor. With a narrow corridor Automower
®
always runs close to the boundary wire
respective guide wire. With a wide corridor
Automower
®
varies how it runs, i.e. close to and
further from the boundary wire respective guide wire.
Corridor width is a relative distance and is stated
on a scale from 0 to 20. The lower the Corridor
width value the closer Automower
®
follows the
boundary wire and/or guide wire.
Different corridor widths can be set for the
boundary wire, guide 1 and on guide 2. The
default setting on Automower
®
is set to a value of
10 for both the boundary wire and guide wires.
The higher the stated Corridor width value, the
less risk there is of tracks forming. However, a
high corridor value means that Automower
®
may
find it difficult to enter passages.
A garden with large open areas should have a
wide Corridor, i.e. a high Corridor width value.
A garden with passages should have a narrow
Corridor, i.e. a low value for the Corridor width.
When the value is set to 0 for the Corridor width,
Automower
®
will run along the boundary wire,
which means it will run with half the mower inside
the loop and half the mower outside. As there are
often flower beds, hedges and walls along with
the boundary wire Corridor width 0 is not
normally recommended. Should you still like to
state this value, the boundary wire must lay
40 cm from solid objects instead of the normal
35 cm.
IMPORTANT INFORMATION
The distance at which the mower follows the
boundary wire varies depending on how the
working area appears. You should perform
some tests to find the highest possible
Corridor width. Use the Test IN (3-2-4)
function to try different values.
Corridor
3-2-3
Boundary corridor
Guide 1 corridor
Guide 2 corridor
Follow loop out
Follow loop in
Corridor width
Test IN
Test OUT
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna AUTOMOWER 220 AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna AUTOMOWER 220 AC in the language / languages: English as an attachment in your email.

The manual is 4,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna AUTOMOWER 220 AC

Husqvarna AUTOMOWER 220 AC User Manual - German - 80 pages

Husqvarna AUTOMOWER 220 AC Additional guide - Dutch - 5 pages

Husqvarna AUTOMOWER 220 AC User Manual - Dutch - 80 pages

Husqvarna AUTOMOWER 220 AC User Manual - French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info