579292
49
Zoom out
Zoom in
Previous page
1/72
Next page
48 - English
6. MENU FUNCTIONS
Automower
®
has a default delay setting of
4minutes for guide 1 and guide 2 and 11 minutes
for the boundary wire. A delay of 99 minutes
means that the function is deactivated.
If both search methods are to be activated, it is
possible for example to set 4 minutes for Guide 1
delay and Guide 2 delay and 9 minutes for
Boundary delay. Automower
®
then searches
irregularly for 4 minutes and then searches for
the guide wires for 5 minutes. If by this time it has
not found one of the guide wires, the mower will
now search for both the boundary wire and guide
wires.
If it is not suitable in the installation to follow the
boundary wire, 99 minutes should be specified as
the delay for the boundary wire.
It is of course possible to specify the same delay
time for both the guide wires and the boundary
wire, e.g. 5 minutes. Automower
®
then searches
irregularly for 5 minutes and when it does not find
the charging station, it continues to search either
by following the guide wires or the boundary wire,
depending on which one it reaches first. Different
delay times can also be chosen for guide 1 and
guide 2.
The mower does not change the search method: If
the mower starts to follow the boundary wire it will
not switch to follow a guide wire.
Corridor width (3-2-3)
The Corridor width setting defines the distances
from the mower's path to the boundary wire or
the guide wire when following these to/from the
charging station. The area beside the wires used
by the mower is called the Corridor.
A low corridor width value represents a narrow
corridor while a high value represents a wide
corridor. With a narrow corridor Automower
®
always runs close to the boundary wire
respective guide wire. With a wide corridor
Automower
®
varies how it runs, i.e. close to and
further from the boundary wire respective guide
wire.
Corridor width is a relative distance and is stated
on a scale from 0 to 20. The lower the Corridor
width value the closer Automower
®
follows the
boundary wire and/or guide wire.
3-2-2
Boundary delay
Guide 1 delay
Guide 2 delay
Follow loop out
Follow loop in
Corridor width
Test IN
Test OUT
Corridor
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna AUTOMOWER 260 ACX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna AUTOMOWER 260 ACX in the language / languages: English as an attachment in your email.

The manual is 4,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna AUTOMOWER 260 ACX

Husqvarna AUTOMOWER 260 ACX User Manual - German - 73 pages

Husqvarna AUTOMOWER 260 ACX Additional guide - Dutch - 5 pages

Husqvarna AUTOMOWER 260 ACX User Manual - Dutch - 78 pages

Husqvarna AUTOMOWER 260 ACX User Manual - French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info