477479
107
Zoom out
Zoom in
Previous page
1/124
Next page
ONDERHOUD
Dutch 107
Carburateur
Uw Husqvarna-product is geconstrueerd en gemaakt
volgens specificaties, die de schadelijke uitlaatgassen
reduceren. Als de motor 8-10 tanks brandstof heeft
verbruikt, is de motor ingereden. Om ervoor te zorgen dat
deze na de periode van inrijden optimaal blijft
functioneren en zo min mogelijk schadelijke uitlaatgassen
uitstoot, moet u uw dealer/servicewerkplaats (die over
een toerenteller beschikt) de carburateur af laten stellen.
Werking
Via de gasklepbediening stuurt de carburateur het
toerental van de motor. In de carburateur worden
brandstof en lucht vermengd. Dit mengsel (brandstof/
lucht) kan worden afgesteld. Om het maximum
vermogen van de machine te kunnen benutten, moet
de afstelling correct zijn.
Afstellen van de carburateur houdt in dat de motor
wordt aangepast aan plaatselijke omstandigheden,
b.v. klimaat, hoogte, benzine en soort 2-taktolie.
De carburateur heeft drie afstelposities:
L = Lage toeren-naald
H = Hoge toeren-naald
T = Stelschroef voor stationair draaien
Met de L- en de H-naalden wordt de gewenste
brandstofhoeveelheid afgesteld in functie van de
luchtstroom die de opening van de gasklepbediening
toelaat. Door de schroeven met de klok mee te
draaien wordt het lucht/brandstofmengsel armer
(minder brandstof) en door ze tegen de klok in te
draaien, wordt het lucht/brandstofmengsel rijker
(meer brandstof). Een armer mengsel geeft een hoger
toerental en een rijker mengsel een lager toerental.
De T-schroef regelt de positie van de
gasklepbediening bij stationair draaien. Als de T-
schroef met de klok mee wordt gedraaid, krijgt men
een hoger stationair toerental en als ze tegen de klok
in wordt gedraaid, een lager stationair toerental.
Basisafstelling
Tijdens het testen in de fabriek wordt de
basisafstelling van de carburateur uitgevoerd. De
basisafstelling is rijker dan de optimale afstelling en
moet tijdens de eerste uren dat de machine in werking
is, in stand worden gehouden. Daarna moet de
fijnafstelling van de carburateur plaatsvinden. Dit
moet gebeuren door een gekwalificeerd deskundig
persoon.
N.B.! Als de snijuitrusting roteert bij stationair toerental,
moet de T-schroef tegen de klok in gedraaid worden tot de
snijuitrusting stopt.
Afstelling van het stationair toerental
Voor met het afstellen wordt begonnen, moet het
luchtfilter schoon zijn en het luchtfilterdeksel gemonteerd
zijn.
Het stationair toerental wordt afgesteld met de
stationairschroef T als opnieuw afstellen noodzakelijk is.
Draai de T-schroef eerst met de klok mee tot de
snijuitrusting begint te roteren. Draai daarna de schroef
tegen de klok in tot de snijuitrusting stilstaat. Het
stationair toerental is correct afgesteld als de motor in alle
posities gelijkmatig draait. Er moet een goede marge zijn
tot het toerental waarbij de snijuitrusting begint te draaien.
Aanbevolen stationair toerental: Zie hoofdstuk
Technische gegevens.
!
WAARSCHUWING! Als het stationair
toerental niet zo kan worden afgesteld
dat de snijuitrusting stilstaat, dient u uw
dealer/servicewerkplaats te raadplegen.
Gebruik de machine nooit voor deze
correct is afgesteld of gerepareerd.
107


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna 555FX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna 555FX in the language / languages: German, Dutch, French as an attachment in your email.

The manual is 9,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna 555FX

Husqvarna 555FX User Manual - English - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info