477482
24
Zoom out
Zoom in
Previous page
1/40
Next page
Maintenance Daily Weekly Monthly
Lubricate the drive shaft.2X
Carburetor
To adjust the idle speed
Your Husqvarna product is made to specifications that
decrease harmful emissions.
1. Make sure that the air filter is clean and the air filter
cover is attached before you adjust the idle speed.
2. Adjust the idle speed with the idle speed screw T
which is identified with "T" mark.
a) Turn the idle speed screw T clockwise until the
cutting attachment starts to rotate.
b) Turn the idle speed screw T counterclockwise
until the cutting attachment stops.
WARNING: If the cutting attachment
does not stop when you adjust the idle
speed, speak to your servicing dealer.
Do not use the product until it is correctly
adjusted or repaired.
3. The idle speed is correct when the engine operates
smoothly in all positions. The idle speed must be
below the speed when the cutting attachment starts
to rotate.
Note: Refer to
Technical data on page 31
for the
recommended idle speed.
To adjust the high speed needle and low
speed needle
The high speed needle and low speed needle can be
adjusted to adapt the fuel supply to local conditions.
Turn the high speed needle and low speed needle
clockwise to decrease the fuel flow.
Turn the high speed needle and low speed needle
counterclockwise to increase the fuel flow.
To adjust the start throttle speed
(555RXT, 555FRM)
1. Apply idle speed to the product.
2. Push the start throttle lock. Refer to
Product
overview on page 3
.
3. If the start throttle speed is less than 4000 rpm, turn
the adjuster screw (A) clockwise. When the cutting
attachment starts to rotate, turn the adjuster
screw (A) 1/2 turn clockwise.
A
4. If the start throttle speed is more than 6500 rpm, turn
the adjuster screw (A) counterclockwise. When the
cutting attachment starts to rotate, turn the adjuster
screw (A) 1/2 turn.
To clean the muffler
WARNING: The muffler gets very hot during
and after operation, also at idle speed. Risk
of fire and burn injuries.
2At an interval of 3 months.
24 1346 - 002 - 08.10.2019
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna 555FRM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna 555FRM in the language / languages: English as an attachment in your email.

The manual is 3,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna 555FRM

Husqvarna 555FRM User Manual - German, Dutch, French - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info