Manual Husqvarna 555 (page 29 of 40) (English)

477637

Zoom out

Zoom in

1/40

1. Loosen the bar nuts that hold the clutch cover/chain

brake. Use a wrench.

Note: Some models have only one bar nut.

2. Tighten the bar nuts by hand as tightly as you can.

3. Lift the front of the guide bar and turn the chain

tensioning screw. Use a wrench.

4. Tighten the saw chain until it is tight against the

guide bar but still can move easily.

5. Tighten the bar nuts using the wrench and lift the

front of the guide bar at the same time.

6. Make sure you can pull the saw chain around freely

by hand and that it does not hang from the guide

bar.

Note:

Refer to

Product overview on page 2

for the

position of the chain tensioning screw on your product.

To do a check of the saw chain

lubrication

1. Start the product and let it operate at ¾ throttle. Hold

the bar approximately 20 cm/8 in above a surface of

light color.

2. If the saw chain lubrication is correct, you see a clear

line of oil on the surface after 1 minute.

3. If the saw chain lubrication does not operate

correctly, do a check of the guide bar. Refer to

To do

a check of the guide bar on page 30

for

instructions. Speak to your servicing dealer if the

maintenance steps does not help.

To do a check of the rim sprocket

The clutch drum has a rim sprocket that can be

replaced.

1. Make sure that the rim sprocket is not worn. Replace

if necessary.

2. Replace the rim sprocket each time you replace the

saw chain.

To lubricate the needle bearing

1. Pull the front hand guard rearward to disengage the

chain brake.

2. Loosen the bar nuts and remove the clutch cover.

Note:

Some models have only one bar nut.

3. Put the product on a stable surface with the clutch

drum up.

587 - 002 - 04.12.2019

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna 555 in the language / languages: English as an attachment in your email.

The manual is 4,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna 555

Husqvarna 555 User Manual - German, Dutch, French - 124 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna 555 Manual

Product: