734096
25
Zoom out
Zoom in
Previous page
1/40
Next page
Drive shaft
Lubricate the drive shaft at an interval of 3 months. Let a
service agent help you if you are not sure about the
procedure.
To attach and remove the locknut
WARNING: Stop the engine, use protective
gloves and be careful around the sharp
edges of the cutting attachment.
Use the locknut to attach some types of cutting
attachments. The locknut has a left thread.
Use a socket wrench with a shaft that is sufficiently
long to let you keep your hand behind the cutting
attachment guard. The arrow in the illustration shows
the area where you can safely operate the socket
wrench.
To attach, tighten the locknut in the opposite
direction to how the cutting attachment rotates.
To remove the locknut, turn it in the same direction
as how the cutting attachment rotates.
Keep count when you remove and attach the
locknut. Replace the locknut after approximately 10
times.
Note: Make sure that you can not turn the locknut by
hand. Replace the locknut if the nylon lining does not
have a resistance of a minimum of 1.5 Nm.
To sharpen the grass knife and grass
blade
WARNING: Stop the engine. Use protective
gloves.
To sharpen the grass knife or grass blade correctly,
refer to the instructions that come with the cutting
attachment.
Sharpen all edges equally to keep the balance.
Use a single-cut flat file.
WARNING: Always discard a blade that is
damaged. Do not try to make a bent or
twisted blade straight and use it again.
To sharpen the saw blade
WARNING: Stop the engine. Use protective
gloves.
To sharpen the blade correctly, refer to the
instructions that come with the blade.
Make sure that the product and blade has sufficient
support when you sharpen it.
1018 - 004 - 06.02.2020 25
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna 545F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna 545F in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna 545F

Husqvarna 545F User Manual - German, Dutch, French - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info