733996
24
Zoom out
Zoom in
Previous page
1/40
Next page
4. Keep a position where the tree or branch can not
hit you when the tension is released.
5. Make one or more cuts of sufficient depth
necessary to decrease the tension. Cut at or near
the point of maximum tension. Make the tree or
branch break at the point of maximum tension.
WARNING: Do not cut straight
through a tree or branch that is in
tension.
WARNING: Be very careful when
you cut a tree that is in tension. There
is a risk that the tree moves quickly
before or after you cut it. Serious injury
can occur if you are in an incorrect
position or if you cut incorrectly.
6. If you must cut across tree/branch, make 2 to 3
cuts, 1 in. apart and with a depth of 2 in.
7. Continue to cut more into the tree until the tree/
branch bends and the tension is released.
8. Cut the tree/branch from the opposite side of the
bend, after the tension is released.
Maintenance
Introduction
WARNING: Read and understand the
safety chapter before you do maintenance
on the product.
Maintenance schedule
WARNING: Remove the battery
before you do maintenance.
The following is a list of the maintenance steps that
you must do on the product. See
Maintenance on page
24
for more information.
Maintenance Before
use Weekly Monthly
Clean the external parts of the product. X
Make sure that the power trigger and the power trigger lockout function cor-
rectly from a safety point of view. X
Clean the chain brake and make sure that it operates safely. Make sure that
the chain catcher is not damaged. Replace it if necessary. X
Turn the guide bar for more equal wear. Make sure that the lubrication hole in
the guide bar is not clogged. Clean the bar groove. X
24 1065 - 005 - 29.06.2020
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna 540i XP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna 540i XP in the language / languages: English as an attachment in your email.

The manual is 4,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna 540i XP

Husqvarna 540i XP User Manual - German, Dutch, French - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info