733795
15
Zoom out
Zoom in
Previous page
1/32
Next page
1. Turn the idle adjustment screw clockwise until the
cutting attachment starts to turn.
2. Turn the idle adjustment screw counterclockwise
until the cutting attachment stops.
Note: See
Technical data on page 19
for the
recommended idle speed.
To do maintenance on the muffler
WARNING: The muffler is designed to
decrease the noise level and to point the
exhaust gases away from the operator. The
exhaust gases are hot and can contain
sparks, which can cause fire if pointed
against dry and flammable material.
1. Examine if your product has a catalytic converter.
See
Technical data on page 19
.
WARNING:
Mufflers that have catalytic
converters get very hot during operation
and will stay hot for some time after you
stop the product. This also applies at idle
speed. If you touch the product it can
result in burns to the skin. Think about of
the risk of fire!
2. Some mufflers have a special spark arrester screen.
Clean the spark arrestor screen with a wire brush if
your product has this type of muffler. Clean the spark
arrestor screen weekly on mufflers without a catalytic
converter and on mufflers with a catalytic converter
this must be done monthly. Replace the spark
arrestor screen if it is damaged and do not use a
product with a damaged spark arrestor screen.
CAUTION: If the spark arrestor screen is
frequently blocked it can be a sign that
performance of the catalytic converter is
decreased. Turn to your servicing dealer
to examine the muffler. A blocked spark
arrestor screen will cause overheating
and result in damage to the cylinder and
piston.
CAUTION: The spark arrestor screen must
be replaced if it is damaged. Do not use a
product if the spark arrestor screen on the
muffler is missing or defective.
To do maintenance on the trimmer
head
1. Only use the recommended cutting attachment and
cutting attachment guard. Refer to
Accessories on
page 20
.
2. Make sure that the cutter on the cutting attachment
guard is not damaged, it cuts the cord to the correct
length.
3. Install the cord as the illustrations on the last pages
of the manual shows.
Cooling system
The product has a cooling system to keep the operation
temperature as low as possible.
Clean the components of the cooling system with a
brush weekly or more frequently in rougher conditions. A
dirty or blocked cooling system makes the product too
hot which causes damage to the piston and cylinder.
The cooling system has the following components:
1. Air intake on the starter.
2. Fins on the flywheel.
331 - 008 -
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna 535LK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna 535LK in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna 535LK

Husqvarna 535LK User Manual - German, Dutch, French - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info