734128
18
Zoom out
Zoom in
Previous page
1/76
Next page
3. Drehen Sie die Stellschraube T im
Uhrzeigersinn, bis die Schneideinheit sich
zu bewegen beginnt.
4. Drehen Sie die Stellschraube gegen den
Uhrzeigersinn, bis die Schneideinheit
stehen bleibt.
WARNUNG: Wenn Sie die
Leerlaufdrehzahl anpassen und
die Schneideinheit nicht anhält,
wenden Sie sich an den nächsten
Servicehändler. Verwenden Sie
das Gerät erst wieder, wenn es
richtig eingestellt oder repariert
wurde.
Hinweis: Die Leerlaufdrehzahl ist richtig
eingestellt, wenn der Motor in allen Stellungen
gleichmäßig läuft. Siehe
Technische Angaben
auf Seite 23
für die empfohlene
Leerlaufdrehzahl.
Wartung des Schalldämpfers
Der Schalldämpfer hat die Aufgabe, den
Geräuschpegel zu dämpfen und die Abgase
vom Anwender wegzuleiten.
WARNUNG: Schalldämpfer mit
Katalysator können während des
Betriebs sehr heiß werden und
bleiben auch einige Zeit nach dem
Abstellen des Produkts heiß. Dies
gilt auch für den Leerlaufbetrieb.
Wenn Sie das Produkt berühren,
kann dies zu Verbrennungen führen.
Denken Sie auch an die
Brandgefahr.
1. Schalten Sie das Gerät aus und lassen Sie
es abkühlen.
2. Entfernen Sie die Abdeckung am
Schalldämpfer.
3. Entfernen Sie die Schraube zur
Befestigung des Funkenfängernetzes.
4. Reinigen Sie das Funkenfängernetz, wenn
es verstopft ist oder beschädigt ist.
ACHTUNG: Weist das
Funkenfängernetz Schäden auf,
muss es ausgewechselt werden.
Benutzen Sie das Gerät nicht, wenn
das Funkenfängernetz auf dem
Schalldämpfer fehlt oder defekt ist.
ACHTUNG: Wenn das
Funkenfängernetz häufig verstopft
ist, kann dies ein Zeichen dafür sein,
dass der Katalysator nicht
einwandfrei arbeitet. Lassen Sie den
Schalldämpfer von Ihrem
Servicehändler kontrollieren. Ein
verstopftes Funkenfängernetz kann
zu Überhitzung führen, wodurch
Schäden an Zylinder und Kolben
entstehen können.
18 1173 - 001 -
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna 525HE3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna 525HE3 in the language / languages: German, Dutch, French as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna 525HE3

Husqvarna 525HE3 User Manual - English - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info