579291
16
Zoom out
Zoom in
Previous page
1/28
Next page
3. Clean the area around the oil filler cap.
4. Remove the oil filler cap.
5. Remove the oil from the dipstick on the oil filler cap.
6. Put the oil filler cap back into the oil filler neck. Do
not tighten the oil filler cap in this step.
7. Pull out the oil filler cap and read the oil level on the
dipstick.
8. If the oil level is low, fill with engine oil until the oil is
at the edge of the oil filler neck. Only use
recommended engine oil. Refer to
4-stroke oil on
page 13
.
9. Install the oil filler cap and tighten it fully.
To adjust the idle speed
Your Husqvarna product is made to specifications that
decrease harmful emissions.
1. Make sure that the air filter is clean and the air filter
cover is attached before you adjust the idle speed.
2. Adjust the idle speed with the idle speed screw T
which is identified with "T" mark.
a) Turn the idle speed screw T clockwise until the
cutting attachment starts to rotate.
b) Turn the idle speed screw T counterclockwise
until the cutting attachment stops.
WARNING:
If the cutting attachment
does not stop when you adjust the idle
speed, speak to your servicing dealer.
Do not use the product until it is correctly
adjusted or repaired.
3. The idle speed is correct when the engine operates
smoothly in all positions. The idle speed must be
below the speed when the cutting attachment starts
to rotate.
Note: Refer to
#
for the recommended idle speed.
To do maintenance on the muffler
WARNING: The muffler decreases the noise
level and points the exhaust gases away
from the operator. The exhaust gases are
hot and can contain sparks. This can cause
fire if pointed against dry and flammable
material.
WARNING: Mufflers with catalytic converters
become hot during operation. Risk of burn or
fire. This also applies at idle speed. To
examine if your product has a catalytic
converter, refer to
#
.
1. Stop the engine and let the muffler become cool.
2. Remove the muffler cover.
3. If the muffler on your product has a spark arrester
screen, do these steps:
a) Do a visual check. Replace the spark arrester
screen if it is damaged.
16
1309 - 002 - 27.08.2020
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna 524LK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna 524LK in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna 524LK

Husqvarna 524LK User Manual - German, Dutch, French - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info