Manual Husqvarna 445e II (page 31 of 120) (English, Portuguese, Spanish)

579280

Zoom out

Zoom in

1/120

Daily maintenance Weekly maintenance Monthly maintenance

Sharpen the saw chain and do a

check of its tension. Refer to

sharpen the saw chain on page 33

Do a check of the chain drive sprock-

et. Refer to

To do a check of the spur

sprocket on page 35

Clean the air intake on the starter.

Make sure that nuts and screws are

tightened.

Do a check of the stop switch. Refer

To do a check of the start/stop

switch on page 32

Make sure that these are no fuel

leaks from the engine, tank or fuel

lines.

Make sure that the saw chain does

not rotate when the engine is at idle

speed.

Make sure that there is no damage

on the right hand guard.

Make sure that the muffler is correct-

ly attached, has no damages and

that no parts of the muffler are miss-

ing.

Maintenance and checks of the safety

devices on the product

To do a check of the brake band

1. Use a brush to remove wood dust, resin and dirt

from the chain brake and clutch drum. Dirt and wear

can decrease the function of the brake. (Fig. 90)

2. Do a check of the brake band. The brake band must

be at a minimum of 0.6 mm/0.024 in thick at its

thinnest point.

To do a check of the front hand guard and the

chain brake activation

1. Make sure that the front hand guard is not damaged

and that there are no defects, such as cracks.

2. Make sure that the front hand guard moves freely

and that it is attached safely to the clutch cover. (Fig.

91)

3. Hold the product with 2 hands above a stump or

other stable surface.

WARNING: The engine must be off.

4. Let go of the front handle and let the guide bar tip fall

against the stump. (Fig. 92)

5. Make sure that the chain brake engages as the

guide bar tip hits the stump.

To do a check of the chain brake

1. Start the product. Refer to

To start the product on

page 26

for instructions.

WARNING: Make sure that the saw

chain does not touch the ground or other

objects.

2. Hold the product tightly.

3. Apply full throttle and tilt your left wrist against the

front hand guard to engage the chain brake. The

saw chain must stop immediately. (Fig. 93)

WARNING: Do not let go of the front handle.

To do a check of the throttle trigger and

throttle trigger lockout

1. Make sure that the throttle trigger and throttle trigger

lockout move freely and that the return spring works

correctly. (Fig. 94)

1286 - 002 - 03.06.2020 31

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna 445e II in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 4,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna 445e II

Husqvarna 445e II User Manual - German, Dutch, French - 100 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna 445e II Manual

Product: