579197

Husqvarna 439 Manual

35
Zoom out
Zoom in
Previous page
1/320
Next page
MAINTENANCE
English – 35
”Air Injection” centrifugal
cleaning
Centrifugal cleaning means the following: All air to the
carburettor passes through the starter. Dirt and dust is
centrifuged out by the cooling fan.
Winter use
Running problems can occur when using the machine in
the cold and snowy conditions caused by:
• Too low engine temperature.
• Icing of the air filter and carburettor.
Special measures are therefore often required:
• Partly mask the air inlet on the starter to increase the
working temperature of the engine.
• Preheat the intake air to the carburettor by using the
heat from the cylinder.
Temperature 0°°
°°
C or colder:
The intermediate wall is designed so it can be adjusted for
running in cold weather, so that preheated air from the
cylinder can pass into the carburettor space preventing
icing of the air filter, etc.
• Loosen the screws on the front handle and detach it
from its mounting.
• Loosen the screws that hold the starter against the
crankcase and remove the starter.
• Detach and replace the air guide plate (black) with the
air guide plate (blue) for winter use. Part number: 584
89 40-01.
• Detach the DF guide from the black air guide plate and
mount it on the blue air guide plate.
• Remove the air filter cover.
• Slide the grommet (blue) upwards from the closed
position to the open position. Use a screw driver.
• Make sure the rib of the grommet is aligned with the
snow mark.
For temperatures below -5°C and/or in snow conditions a
special cover is available, which is mounted on the starter
housing. These reduce the flow of cooling air and prevent
large amounts of snow from being sucked into the
carburettor space.
Part number: 584 89 47-01.
IMPORTANT! In order to maintain operation of the
centrifugal cleaning system it must be regularly
maintained. Clean the air intake to the starter, the fins on
the flywheel, the space around the flywheel, inlet pipe
and carburettor compartment.
IMPORTANT! If the special winterising kit has been
fitted or any measures have been taken to increase the
temperature these changes must be reversed before the
machine is used in normal temperature conditions.
Otherwise there is a risk of overheating, resulting in
severe damage to the engine.
H1156898-39,439,west,R1.fm Page 35 Monday, March 24, 2014 1:43 PM
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna 439 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna 439 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 82,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info