734169
105
Zoom out
Zoom in
Previous page
1/606
Next page
GENERAL SAFETY PRECAUTIONS
English 105
Electrical safety
It is recommended that you use a Residual Current
Device (RCD) with a tripping current of not more than
30mA. Even with a RCD installed 100% safety cannot
be guaranteed and safe working practice must be
followed at all times. Check your RCD every time you
use it.
Before use, examine the cable for signs of damage or
ageing. If the cable is found to be defective, take the
product to an Authorized Service Center and have the
cable replaced.
Do not use the product if the electric cables are
damaged or worn.
Immediately disconnect from the mains electricity
supply if the cable is cut, or the insulation is damaged.
Do not touch the electric cable until the electrical
supply has been disconnected. Do not repair a cut or
damaged cable. Take the product to an Authorised
Service Centre and have the cable replaced with a
genuine spare cable.
Always make sure that the cable/extension cord is
kept behind the user, ensuring that it does not create
a source of danger for the user or for other persons,
and check that it cannot be damaged (by heat, sharp
objects, sharp edges, oil, etc);
Position the cable so that it will not be caught on
branches and the like, during cutting.
Always switch off at the mains before disconnecting
any plug, cable connector or extension cable.
Switch off, remove plug from the mains and examine
electric cable for damage or ageing before winding
cable for storage. Do not repair a damaged cable.
Take the product to an Authorised Service Centre and
have the cable replaced.
Remove the plug from the mains before leaving the
product unattended for any period.
Always wind cable carefully, avoiding kinking.
Use only on AC mains voltage shown on the product
rating label.
The chainsaw is double insulated to EN60745-1 & 2-
13.
Make sure your extension cord is in good
condition. Inspect extension cord before use and
replace if damaged. Do not use a damaged cord.
Cord insulation must be intact with no cracks or
deterioration. Plug connectors must be undamaged.
Damaged extension cords increase the risk of electric
shock.
Residual Current Device (RCD) protection should
be provided on circuit or outlet to be used.
Receptacles are available having built-in RCD
protection and may be used for this measure of safety.
Inspect chain saw cords periodically and if damaged,
have repaired by an authorized service dealer.
Cables
Extension cables are available from your local
Approved Service Centre.
Only use approved extension cables.
Extension cables and leads should only be used if
they are designed for outdoor use and comply with
H07 RN-F or IEC 60245 designation 66.
Before using a new chain saw
Please read this manual carefully.
Fill with chain oil. See instructions under the heading
Filling with chain oil.
Do not use the chain saw until sufficient chain oil has
reached the chain. See instructions under the
heading Lubricating cutting equipment.
Check that the cutting equipment is correctly fitted
and adjusted. See instructions under the heading
Assembly.
Long-term exposure to noise can result in permanent
hearing impairment. So always use approved hearing
protection.
This saw is intended for use between the
temperatures of -20°C (-4°F) and +40°C (104°F).
!
WARNING! Under no circumstances may
the design of the machine be modified
without the permission of the
manufacturer. Always use original
accessories. Non-authorized
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
!
WARNING! A chain saw is a dangerous
tool if used carelessly or incorrectly and
can cause serious, even fatal injuries. It
is very important that you read and
understand the contents of this
operator’s manual.
!
WARNING! This machine produces an
electromagnetic field during operation.
This field may under some
circumstances interfere with active or
passive medical implants. To reduce the
risk of serious or fatal injury, we
recommend persons with medical
implants to consult their physician and
the medical implant manufacturer before
operating this machine.
!
WARNING! Long term inhalation of chain
oil mist and dust from sawdust can
represent a health risk.
105


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna 420EL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna 420EL in the language / languages: All languages as an attachment in your email.

The manual is 50,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info