Manual Husqvarna 226R (page 72 of 128) (English, Portuguese, Spanish)

579270

Zoom out

Zoom in

1/128

ASSEMBLY

72 – English

Fitting the main body

Connect the engine (A) to the tube (B) with three screws

(C).

Assembling the handlebar and

throttle

• Fit the handlebar in the handlebar clamp on the shaft

using four screws.

Fit the protective sleeve as shown in the diagram.

Connecting throttle cable and

stop switch wires

1 Remove the air ﬁlter cover.

2 Insert the throttle cable (A) through the carburettor

bracket (B), then screw the cable adjuster sleeve (C)

into the carburettor bracket fully.

3 Position the slotted ﬁtting (D) on the carburettor so the

recessed hole (E) for the cable lug (F) is away from the

cable adjuster sleeve.

4 Rotate the carburettor throttle cam and slip the throttle

cable through the slot in the slotted ﬁtting, making

sure the cable lug drops into the recessed hole.

5 Operate the throttle trigger a few times to make sure

that it works correctly.

6 Adjust the cable adjuster sleeve so the stop on the

carburettor throttle cam just contacts the throttle stop

and the cable position keep 1-2 mm play between the

cable lug and the slotted ﬁtting when the throttle

trigger is fully depressed.

7 When the throttle cable is adjusted correctly, tighten

the locking nut (G).

BCA

1-2mm

H1153276-30,226R.fm Page 72 Tuesday, April 15, 2014 8:35 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna 226R in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 16,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna 226R Manual

Product: