579184

Husqvarna 136LiHD45 Manual

11
Zoom out
Zoom in
Previous page
1/214
Next page
GENERAL SAFETY PRECAUTIONS
English – 11
Power trigger on front handle
The power trigger on front handle is designed to prevent
accidental operation. It is necessary to press both the
power trigger on the front handle and the power trigger on
the rear handle. The order actuation power trigger front
handle and power trigger on the rear handle doesn’t
matter. When you release the handle, the power trigger on
the rear handle and the power trigger on the front handle
both move back to their original positions. This movement
is operated by independent springs. This arrangement
means that the power trigger on the rear handle is
automatically locked at no operation state.
Turn on the machine. Press the power trigger on the front
handle.
(Figure 6)
Then press the power trigger on the rear handle up to
apply full power.
(Figure 7)
Release the power trigger on the rear handle and check
thereby the free back movement of the power trigger. The
cutting unit must stop within 1 second.
Restart the machine and release the power trigger on the
front handle on the front handle. Check that the power
trigger lockout returns to its original position when you
release it. The cutting unit must stop within 1 second.
Hand guard
The hand guard prevents hands from coming into contact
with the moving blades, for example, if the operator loses
grip on the front handle.
(Figure 9)
Check that the hand guard is fitted correctly. Check that
the hand guard is undamaged.
Blade and blade guard
The outer part of the blades (1) is shaped as blade
guards.
(Figure 9)
Check that the blade guard is not damaged or distorted.
Replace the cutting unit if it is bent or damaged. The term
”power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power
tool.
Battery and battery charger
This section describes the battery and battery charger
safety for your battery product.
Only use Husqvarna original batteries for Husqvarna
products and only charge them in an original battery QC
charger from Husqvarna. The batteries are software
encrypted.
Use only a Husqvarna original BLi battery in your
machine.
Battery safety
The rechargeable Husqvarna batteries, BLi, are
exclusively used as a power supply for the relevant
Husqvarna cordless appliances. To avoid injury, the
battery must not be used as a power source for other
devices.
(Figure 2)
• Use the battery in surroundings where temperatures
are between -10
°C and 40 °C.
• Do not expose the battery to microwaves or high
pressure.
• Never clean the battery or the battery charger with
water. See also instructions under the Maintenance
heading.
• Store the battery out of reach of children.
• Protect the battery from rain and wet conditions.
Battery charger safety
Only use Chargers, Husqvarna QC, for charging the
Husqvarna replacement batteries, BLi.
(Figure 3)
!
WARNING! Protect the battery from
direct sunlight, heat or open flame. There
is a risk the battery may explode if it is
thrown into an open fire. There is a risk of
burns and/or chemical burns.
!
WARNING! Avoid all skin contact with
battery acid. Battery acid may cause skin
irritation, burns or corrosive injuries. If
you get acid in your eyes, do not rub but
flush your eyes with plenty of water for at
least 15 minutes. See a doctor. You must
wash any exposed skin with copious
amounts of water and soap in case of
incidental contact.
!
WARNING! Never connect the battery
terminal to keys, coins, screws or other
metal as this may short-circuit the
battery. Never insert objects into the
battery's air vents.
Unused batteries must be kept away from
metal objects such as nails, coins,
jewellery. Do not try to disassemble or
crush the battery
!
WARNING! Minimise the risk of electric
shock or short circuit as follows:
Never insert any object into the charger’s
cooling slots.
Do not try to dismantle the battery
charger.
Never connect the charger terminals to
metal objects as this can short circuit the
battery charger.
Use approved and intact wall sockets.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna 136LiHD45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna 136LiHD45 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 18,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info