477488
13
Zoom out
Zoom in
Previous page
1/32
Next page
To assemble the guard and trimmer head/
plastic blades
CAUTION: Make sure that the guard
extension is assembled.
1. Install the trimmer guard/cutting attachment guard
(A) intended for operation with the trimmer head/
plastic blades.
2. Hang the trimmer guard/cutting attachment guard (A)
on the two hooks on the plate holder (M).
3. Bend the guard around the shaft and tighten it with
the bolt (L) on the opposite side of the shaft. Use the
locking pin (C).
4. Put the locking pin in the groove on the screw head
and tighten.
A
C
L
M
5. Install the drive disc (B) on the output shaft.
H
B
C
M L
A
6. Turn the output shaft until 1 of the holes in the drive
disc aligns with the related hole in the gear housing.
7. Put the locking pin (C) in the hole to lock the shaft.
8. Install the trimmer head/plastic blades (H)
counterclockwise.
HH
9. To disassemble the trimmer head/plastic blades,
follow the instructions in the opposite sequence.
To assemble the shoulder harness
1. Put the ring of the shoulder harness strap through
the hook (A) and attach it with the bolt.
2. Attach the hook (B) of the shoulder strap to the ring
(C) on the frame.
AB
C
To adjust the shoulder harness
1. Stop the engine.
2. Put on the harness.
3. Adjust the shoulder strap to make the product weigh
equally on your shoulders.
Operation
Introduction
WARNING: Before you operate the product,
you must read and understand the safety
chapter.
Before you operate the product
Examine the work area to make sure that you know
the type of terrain, the slope of the ground and if
there are obstacles such as stones, branches and
ditches.
Do an overhaul inspection of the product.
Do the safety inspections, maintenance and
servicing that are given in this manual.
Make sure that all covers, guards, handles and the
cutting equipment are correctly attached and not
damaged.
975 - 001 - 26.09.2019 13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna 135R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna 135R in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna 135R

Husqvarna 135R User Manual - German, Dutch, French - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info