Manual Husqvarna 135R (page 5 of 32) (English)

477488

Zoom out

Zoom in

1/32

• Never use a product that is faulty. Carry out the

safety checks, maintenance and service instructions

described in this manual. Some maintenance and

service measures must be carried out by trained and

qualified specialists. Refer to

Maintenance on page

• Use personal protective equipment. Refer to

Personal protective equipment on page 6

• Do not use the product in bad weather, such as

dense fog, heavy rain, strong wind, intense cold, etc.

Working in bad weather is tiring and often brings

added risks, such as icy ground, unpredictable felling

direction, etc.

• Take great care when cutting a tree that is in

tension. A tree that is in tension may spring back to

its normal position before or after being cut. If you

position yourself incorrectly or make the cut in the

wrong place the tree may hit you or the product and

cause you to lose control. Both situations can cause

serious personal injury.

• The only accessories you can operate with this

engine unit are the cutting attachments we

recommend. Refer to

Technical data on page 25

• Watch out for thrown objects. Always wear approved

eye protection. Never lean over the cutting

attachment guard. Stones, rubbish, etc. can be

thrown up into the eyes causing blindness or serious

injury.

• Never use the product if you are tired, if you are ill, if

you have consumed alcohol, or if you are taking

other drugs or medication that can affect your vision,

judgement or coordination.

• Long-term exposure to noise can result in permanent

hearing loss. Always use approved hearing

protection.

• Listen for warning signals and loud voices when you

use hearing protection. Always remove your hearing

protection when the engine stops.

• Carry out an overall inspection of the product before

use. Refer to

Before you operate the product on

page 13

• Never use the product if it is changed or defective.

• Make sure that the spark plug cap and ignition lead

are not damaged to prevent the risk of electrical

shock.

• Look around the work area to make sure that no

persons, animals or objects have a negative effect

on the safety of the operation of the product.

• Look around the work area to make sure that no

persons or animals touch the cutting attachment or

are hit by objects that are ejected from the cutting

attachment.

• Examine the work area. Remove all loose objects,

such as stones, broken glass, nails, steel wire and

string, that can eject or wind around the cutting

attachment.

• Do not use the product in a situation or location

where you can not get aid if an accident occurs.

• Do not use the product without a guard.

• Make sure that persons or animals keep a distance

of a minimum of 15 m/50 ft during work. Always look

behind you before you turn around with the product.

Stop the product immediately if a person or animal

enters the 15 m/50 ft safety zone. If more than one

operator does work in the same area, keep a safety

distance of a minimum of 2 times the tree height and

a minimum of 15 m/50 ft.

• Make sure that you can move safely and have a safe

stance. Examine the area around you for obstacles

such as roots, rocks, branch and ditches. Be careful

during work on slopes.

• Do not overreach. Keep a stable position of the feet

and a good balance at all times.

• Before you start the product, put it on a flat surface,

at a minimum of 3 m from the fuel source and from

where you fill fuel. Make sure that there are no

objects near or touching the cutting attachment.

• If the cutting attachment rotates at idle speed, let a

service agent adjust it. Do not use the product until it

is adjusted or repaired.

• Look out for thrown objects. Always use approved

eye protection and keep away from the cutting

attachment guard. Stones and other small objects

can eject into your eyes and cause blindness or

other injuries.

• Do not put the product down with the engine on

unless you have it in clear view.

• Do not remove the cut material, or let other persons

remove cut material, while the engine is on or the

cutting equipment rotates, as this can result in

serious injury.

• The bevel gear can get hot during use and may

remain so for a while afterwards. You could get burnt

if you touch it.

• Always stop the engine and make sure that the

cutting equipment does not rotate before you remove

material that is wound around the blade shaft or

caught between the guard and the cutting

attachment. The cutting equipment continues to

rotate even after the throttle has been released.

Ensure that the cutting attachment has stopped

completely and disconnect the spark plug cap before

you start to work on it.

• Be careful when you remove material from around

the cutting equipment. The bevel gear gets hot

during operation and can cause burn injuries.

• The exhaust fumes from the engine are hot and can

contain sparks. Risk of fire. Be careful around dry

and flammable material.

• Stop the engine before you move to a new work

area. Always attach the transport guard before you

move the equipment.

• Never use the product indoors or in spaces lacking

proper ventilation. Exhaust fumes contain carbon

monoxide, an odourless, poisonous and highly

dangerous ga can result in death due to asphyxiation

or carbon monoxide poisoning.

975 - 001 - 26.09.2019 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna 135R in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna 135R

Husqvarna 135R User Manual - German, Dutch, French - 108 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna 135R Manual

Product: