477689
12
Zoom out
Zoom in
Previous page
1/320
Next page
To adjust the blower nozzle
1. Twist the nozzle to the left to disengage the bayonet
mount.
2. Move the nozzle to applicable position.
3. Twist the nozzle to the right until you feel a click.
To vacuum
Before you vacuum, put on the necessary safety
equipment.
WARNING: Make sure that the collection
bag is not damaged and that the zipper is
closed before use. Do not use a bag that is
damaged. This prevents injury caused by
flying debris. Left hand operation increases
the risk. Do not let your body touch the
exhaust outlet area.
WARNING: Do not start the blower if the
inlet cover is open or damaged (except if the
vacuum tube is fitted).
During operation of the blower the collection bag
must be held by the shoulder strap. The strap must
be worn on the top of the shoulder.
Start the blower. Obey the instructions in the start
and stop section
To start and stop on page 11
. Read
the safety instructions
Safety on page 7
.
To empty the collection bag
WARNING: Always examine the collection
bag. Make sure that it is not damaged and
that the zipper is closed before use. Do not
use a damaged bag. There is a risk of injury
because of flying debris. Be careful if left
hand operation is applied. Do not touch the
exhaust outlet area.
1. Stop the product.
2. Open the zipper on the side.
3. Empty the collection bag.
4. Close the zipper.
Maintenance
WARNING: Read and understand the safety
chapter before you clean, repair or do
maintenance on the product.
Maintenance schedule
Make sure that you obey the maintenance schedule.
The intervals are calculated from daily use of the
product. The intervals are different if you do not use the
product each day. Only do the maintenance work that is
found in this manual. Speak to an approved service
center about other maintenance work not found in this
manual.
Daily maintenance
Clean the external surfaces.
Examine the speed control and the throttle trigger
function. Replace damaged parts.
Examine the stop switch. If it is necessary, replace it.
Examine the idle speed.
Clean the air filter. If it is necessary, replace it.
Make sure that the inlet cover can be locked in
closed position. Make sure that the impeller is clean.
Tighten all nuts and screws.
Make sure that the housings are free of cracks.
Make sure that the collection bag is not damaged
and that the zipper works. Replace the bag if
necessary.
Weekly maintenance
Examine the condition of the starter device, the
starter rope and the tension spring. Replace all
damaged parts.
Examine the condition of the air intake at the starter
device. Remove debris if the air intake is clogged.
Clean the external side of the spark plug. Remove it
and examine the electrode gap. Adjust the distance
to 6 mm (0.024 in) or replace the spark plug.
Clean the blades on the impeller.
Clean the spark-arresting screen and replace it if
necessary (not on mufflers with a catalytic
converter).
Clean the carburetor area.
Clean the air filter.
Monthly maintenance
Examine the starter rope handle and the starter
rope.
Clean the fuel tank.
Clean the carburetor and the area around it.
Clean the blades on the impeller.
Examine the fuel lines for cracks or other damage.
Change if necessary
Change the fuel filter in the fuel tank.
Examine all cables and connections.
Replace the spark plug.
Change the air filter.
Yearly maintenance
Examine the spark plug.
Clean the external surface of the carburetor and its
adjacent areas.
12
237 - 009 - 16.12.2019
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna 125B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna 125B in the language / languages: English as an attachment in your email.

The manual is 6,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna 125B

Husqvarna 125B User Manual - German, Dutch, French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info