Manual Huskystar 207 (page 30 of 40) (English)

474379

Zoom out

Zoom in

1/40

Stitch selector: 5 Stitch length: 1 - 3

6 (for Model 207) Stitch width: 5 (for Model 215)

Presser foot: Zigzag foot and Hem guide Thread tension: 4 - 6

Blind Stitch Hemming

1/2

NOTE: For Model 215, refer to page 14 when

selecting stretch

titch pattern 6.

1 How to fold the fabric.

Wrong side of fabric

0.4-0.7 cm (5/32"-1/4")

2 Lower the presser foot, then loosen

the ankle screw to place the hem

guide between the screw and the shank

of ankle.

Tighten the screw making sure the wall

of the hem guide is placed in the middle

of the toes of the presser foot.

3 Raise the presser foot and place the

fabric under the foot so that the soft fold

rests against the wall of the hem guide.

Lower the foot and stitch slowly for

better control. The left swing of the zig-

zag stitch should pierce the fold of the

hem. While sewing, make sure the fold

runs along the wall of the hem guide.

4 Open the fabric ﬂ at with the right

side facing up and press. You should

barely be able to see the stitches.

My sewing machine has not been used for several years. Can I oil and tune it up myself or does it need to be done professionally Submitted on 22-4-2022 at 20:16
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Huskystar 207 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Huskystar 207 Manual

Product: