Manual Huskystar 207 (page 10 of 40) (English)

474379

Zoom out

Zoom in

1/40

Setting Spool Pins

The spool pins are used for holding the

spool of thread to feed thread to the

machine. To use, pull up the spool pin.

Push down for storage.

Upper thread Hole Tangle

NOTE: When using thread which has a tendency to

tangle around the spool pin,thread through the

hole of spool pin as shown.The hole should face

the thread spool.

Removing or

Inserting the Bobbin Case

Switch off the main switch.

Open the hook cover.

Hook cover

Raise the needle by turning the handwheel

toward you.

Take out the bobbin case by holding the

latch.

Latch

When inserting the bobbin case, place the

ﬁ nger into the recess of the hook race area.

Finger

My sewing machine has not been used for several years. Can I oil and tune it up myself or does it need to be done professionally Submitted on 22-4-2022 at 20:16
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Huskystar 207 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Huskystar 207 Manual

Product: