809501
4
Zoom out
Zoom in
Previous page
1/32
Next page
4
The manufacturer does not accept responsibility for any damages that may arise due to non-
observation of these instructions.
Do not use the unit if it is damaged. If you are in any doubt, consult an engineer.
Connection and installation of your Husky unit are to be carried out in strict compliance
with the relevant instructions in this user manual.
Make sure there is a suitable power outlet with proper grounding to power the unit.
For safety, the unit must be properly earthed in accordance with specifications.
Always remember to unplug the unit before cleaning. Never unplug this unit by pulling
on the power cable. Always grip plug firmly and pull straight out from the socket.
All electrical repairs must be carried out by a qualified engineer. Inadequate repairs may
be dangerous.
Do not damage any parts of the chiller/freezer which carry refrigerant by piercing,
perforating, crushing, twisting or scraping. If refrigerant comes into contact with the
eyes it may cause serious eye injury.
Do not obstruct or cover the ventilation grille.
Do not allow children to play with the unit, or to sit on it or hang onto the door.
This unit is not intended for use by persons (including children) with reduced physical,
sensory or mental capabil ities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the unit by a person responsible
for their safety.
BEFORE USING FOR THE FIRST TIME
IMPORTANT: Before switching the unit on, we recommend you allow it to stand
upright for 8 hours. Failure to do this may result in damage to the unit.
Remove the wooden pallet and the packing.
To ensure correct operation, it is important that the unit is level. The cabinet may be
levelled by turning either or both of the adjustable feet in the front corners. Use a spirit
level to check.
Before operation, we recommend that the cabinet is cleaned for reasons of hygiene and
to remove any residue left from manufacture.
For good circulation, vents must not be blocked. Keep a minimum of 100mm of clear
space around the chiller/freezer. Your Husky unit should be placed on flat and firm
surface for quieter operation.
Do not expose the unit to direct sunlight or a heat source such as ovens, radiators,
heaters, etc.
Do not under any circumstances place heated food or beverages in your Husky
commercial chiller/freezer.
Do not open the door more often than necessary to lessen the escape of cold air.
For better air circulation, do not overfill the unit.
Adjust the thermostat according to the amount of product and the ambient
temperature.
International PRO upright manual 240317 EDITION 2 v2.indd 4 28/03/2017 08:34
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husky F5PROFREEZER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husky F5PROFREEZER in the language / languages: English as an attachment in your email.

The manual is 7.09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info