809499
5
Zoom out
Zoom in
Previous page
1/32
Next page
5
Troubleshooting
Before calling Technical Support, please check the following points; you may be able to solve any
problem yourself.
Problem
The chiller/freezer
does not work
properly.
The chiller or freezer’s
internal temperature is
too high or too low.
The chiller/freezer is
noisy in operation or
makes unusual noises.
Note: It is normal to
hear some noises as
refrigerant flows through
the compressor.
Outer surfaces are wet
Inner surfaces are wet
Possible Cause
The unit is not plugged in.
The plug and/or the power cable
are faulty.
The fuse has blown.
The unit is faulty.
The wrong temperature is selected.
The factory default settings for the
controller are incorrect.
The condenser is blocked by an
accumulation of dust.
The doors are not fully closed.
The chiller/freezer is close to a heat
source or the ambient temperature
is too high.
The ventilation grille is blocked.
The unit is not on a level, firm
surface, or the unit may be touching
other items.
The chiller/freezer is vibrating
against a neighbouring object.
The unit may be close to a water
source or leak.
The door may be opened too often
or kept open too long.
Action
Connect the plug to the
power supply
Call your supplier or a
qualified engineer.
Replace the fuse with one of
the same rating.
Call your supplier or a
qualified engineer.
Check the controller and
adjust the set temperature.
Call your supplier or a
qualified engineer.
Clean using a vacuum cleaner
and soft brush attachment
(see pages 8, 14, 20, or 24)
Check the unit is level and
the seals are not damaged.
Move the unit to a better
location and check it is out of
direct sunlight.
Move the chiller to improve
free movement of air.
Check location and position
using a spirit level.
Relocate the chiller or the
object.
Dry surfaces thoroughly and
move the unit.
Try to minimise opening of
the doors for better cooling
performance.
International PRO upright manual 240317 EDITION 2 v2.indd 5 28/03/2017 08:34
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husky F5PRO-H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husky F5PRO-H in the language / languages: English as an attachment in your email.

The manual is 7.09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info