807024

Hurom M100 Series Manual

18
Zoom out
Zoom in
Previous page
1/21
Next page
1717
12. Before Requesting for Repair
13. Error Code (common for juicer and blender)
Code Root cause Actions to take
Er01
If an overcurrent flows through the product,
this error is generated to protect the
product.
Stop operating the product and restart it
after a few minutes.
If the same problem continues to occur,
please contact the HUROM After-sales
Service Center.
Er04
If a high voltage is applied to the product,
this error is generated to protect the
product.
Stop operating the product and restart it
after a few minutes.
If the same problem continues to occur,
please contact the HUROM After-sales
Service Center.
Er06
1. If the automatic reverse rotation is
operated often during the juicer operation,
this error may be generated to protect the
product. (This is an operation to protect
the chamber in case hard ingredients
or ingredients unable to be juiced are
inserted.)
2. This error may be generated if the motor
fails to perform the initial activation while
there are too many ingredients in the
blender container.
3. This error may be generated if the
overloading on the motor leads to activation
of the temperature protection device.
4. This error may be generated if the sensor
that detects the motor’s operation is broken.
1. Stop operating the product, check and
remove the contents inside the juicer’s
chamber set, and then restart it.
2. Stop operating the product and reduce
the amount of contents inside the blender
container or raise the motor speed at the
initial operation.
3. If the motor stops due to overloading,
let it rest for about 30 minutes before
operating the machine again.
4. If the same problem continues to occur,
please contact the HUROM After-sales
Service Center.
└┘
This error may be generated if the jog dial or
the [START/STOP] button is controlled while
there is no juicer chamber set or blender
container on the product body.
Install the juicer or blender container on
the product body before use.
If the same problem continues to occur,
please contact the HUROM After-sales
Service Center.
Juicing is automatically
terminated before the
5-minute timer ends.
It is a function that automatically shuts down to protect the product in case the
automatic reverse rotation is operated often during juicing. This may occur if it is
impossible to extract or if uncut ingredients are added.
Please refer to Page 12 of the manual for the instructions on each ingredient and
insert the ingredients accordingly.
Blender
The motor stops while the
blender is in operation.
If the blender is overloaded, the motor may stop. Turn off the power and remove
the ingredients that cause the overloading or let it rest for about 30 minutes.
Blender’s grinding
operation does not work.
The machine may stop operating if there are too many ingredients or the
ingredients are too thick.
Adjust the amount and size of the ingredients and then operate the machine again.
In case dry ingredients are used in a large volume, add more liquid before
operation.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hurom M100 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hurom M100 Series in the language / languages: English as an attachment in your email.

The manual is 3.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info