807024
8
Zoom out
Zoom in
Previous page
1/21
Next page
07
5. Power Switch and Jog Dial Guide
OPERATE
- It works when the [START/STOP] button is
briefly pressed in the Standby Mode.
- It is used when activating the product for
juicing.
- It is automatically terminated and switched to
the Standby Mode after 5 minutes elapse from
the start of the operation. If the chamber cover
is opened and then closed during operation for
additional insertion of ingredients, the timer is
reset.
* If the hopper cover is opened during operation,
the product stops. If the hopper cover is
closed again within 60 seconds, the operation
continues. But, if 60 seconds elapse, the
operation automatically stops and it switches to
the Standby (stop) state.
STOP
- This is used to stop the product's operation.
- The product stops when the [START/STOP]
button is briefly pressed in the operation state.
* If the chamber set is not installed, all lamps
are turned off.
* When 1 minute has elapsed from the Standby
(stop) state, the product enters the power
saving mode (light turned off). If the [START/
STOP] button is pressed or the chamber
set is assembled, the power saving mode is
deactivated and it switches to the Standby (stop)
state.
REVERSE ROTATION
- This is used when the operation pauses or
a reverse rotation is needed due to excessive
insertion of ingredients during extraction.
* It works only when the [START/STOP] button
is pressed for over 1 second, and it stops when
the switch is released.
* If the screw stops during extraction, the
product automatically rotates in reverse but, if
the power is unstable, the reverse rotation may
not work. In such a case, press the [START/
STOP] button for over 1 second to activate a
reverse rotation and then press the [START/
STOP] button again briefly to activate.
Manual Mode 01
Turn the jog dial clockwise to operate the device
at a desired speed.
Once cooking finishes, return the jog dial to the
[ Power Display Lamp ] position.
* The motor stops automatically after max.
1 minute of operation.
Manual Mode 02 (Pulse Mode)
While the [START/STOP] button is pressed,
the motor operates at the maximum speed.
Once the button is released, the operation stops
and it switches to the Standby (stop) state.
* The motor stops automatically after max.
1 minute of operation.
When you turn the jog dial in Auto Mode
the LED of the desired program mode is lit and,
once the [START/STOP] button is pressed,
the selected [Auto Mode] begins.
Once cooking finishes, the operation stops
automatically.
To stop the operation, return the jog dial to the
Power Display Lamp position or press the
[START/STOP] button, which cancels the
operation and switches to the Standby Mode.
< Juicer Standby Mode (container present) > < Blender Standby Mode (container present) >
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hurom M100 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hurom M100 Series in the language / languages: English as an attachment in your email.

The manual is 3.68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info