785968
10
Zoom out
Zoom in
Previous page
1/12
Next page
- 10 -
Before Requesting for Repair / Error Code
Malfunction Causes Solution
The indicator light does not light
up.
Circuit power is not connected. Check if power is connected.
The circuit is broken. Send it to the designated service
center for repair.
The heating plate does not heat
up.
The circuit is broken.
Send it to the designated service
center for repair.
The fuse box is blocked.
The heating plate is broken.
The indicator light lights up. The circuit is broken. Send it to the designated service
center for repair.
The heating plate does not heat
up. The heating plate is broken.
Rice is uncooked.
There is too much or too little
food for cooking.
Adjust the total volume of rice and
water in the range between the
highest and lowest water grids.
The ratio of rice and water is
not right. Adjust the ratio of rice and water.
The inner pot is not set
completely.
Move the inner pot carefully to set it
correctly.
There is foreign object between
the inner pot and the heating
plate.
Remove the foreign object, but avoid
direct contact with water when
washing.
The inner pot has been
deformed. Send it to the designated service
center for repair.
The circuit is broken.
The sensor is broken.
Rice is burned.
The inner pot is not set
completely.
the inner pot carefully to set it
correctly.
The inner pot has been
deformed. Send it to the designated service
center for repair.
The circuit is broken.
The sensor is broken.
Error code for automatic
switching to Keep Warm mode or
digital display: E5
It burned because there was no
water in the inner pot.
fter the power is turned off, the
cooker can be used normally when
the temperature of the rice cooker
drops.
Porridge has overflowed. There is too much food for
cooking. Adjust the amount to the right level.
Error code for digital display
: E1/E2/E3/E4 The circuit is broken.
Press the [Cancel] button, turn off
the power, and then turn it back on.
If the problem persists, send it to the
designated service center for repair.
Turn on the power. If the problem
persists, send it to the designated
service center for repair.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hurom HRC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hurom HRC in the language / languages: English as an attachment in your email.

The manual is 0.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info