785974
23
Zoom out
Zoom in
Previous page
1/24
Next page
23

Check if the power cord is connected properly.
Check if the hopper is assembled properly. Check if the hopper’s lid is assembled properly.
Check if the product is assembled in proper order. Refer to p. 08~11 (How to Assemble).
The juicer would not operate properly when the hopper is not assembled properly.
If the trouble still persists after taking said measures, please contact our customer center for further
instruction.

Have you in heavy loads or large pieces of ingredients into the appliance?

If the issue is not resolved after following the above process, please contact your local Customer
Service Center.

These are molding marks resulting from the normal manufacturing process.
This is normal and there is no problem for use.

The chamber set cannot be to the main body when the lever is set to .




of the ingredient Check the [MAX], [ ] icon on the side of the hopper and make sure the


It is possible that there is pulp remaining inside. Set the lever to (Half Open), turn the power dial to

and repeat this twice or three times. You will be able to open the chamber lid easily afterwards.



cannot open the lid then please contact our Customer Service Center for further instructions.

The chamber can shake slightly due to the rotation of the motor.

the characteristics of the ingredients (hardness and toughness). This is a normal as the movement is
caused by the rotating screw and is not considered as a trouble. It may seem that it is shaking more


the friction between ingredients depending on the characteristics of the ingredients (i.e. carrot/

for operation.
Before Requesting for Repair
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hurom H-AI Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hurom H-AI Series in the language / languages: English as an attachment in your email.

The manual is 3.87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info