685907
82
Zoom out
Zoom in
Previous page
1/100
Next page
75
eVenT mode opTIons (aGC, surVeyor) ......................................
Event Mode is a special function of the controller designed
to work with Surveyor Golf control software.
Event mode allows the controller to run individual station
events which have been created for it by golf control
software. These events may not be created or edited in
the controller, and only special software can operate the
controller in this mode.
If you are not using Surveyor control software,
you should never use the Event Mode options.
The normal operating mode of the controller is called
FCP mode (Field Controller Programs). This means the
controller will use Programs A, B, C, D, E, and F normally.
If the controller is switched to Event mode, the A through F
Programs will not run.
Change to Event Mode: This will switch the controller to
the System Event mode (Surveyor Golf customers, only).
Turn the dial to Advanced Features. Press the + button.
Arrow down to Event Mode Options. Press the + button.
The first selection is Change to Event Mode.
The display will advise that this will run System Events
instead of programs A-F. If Event mode is selected, the
display will always show System Event Mode On when the
dial is in the Run position.
There is no special display when the controller is in the
normal FCP mode… as long as System Event Mode On is
not displayed at the Run position, the controller is in the
conventional FCP mode.
The Event Mode Options screen allows the user to view
three other selectable screens. While in the Event Mode
Options screen, simply highlight the desired selection and
press the + button. The three selections available are View
System Events, Event Count, and Delete Events. These
are only used in Surveyor Golf applications, to verify
downloaded schedule information.
View System Events: This will allow you to view System
Events for 1 to 3 days worth of downloaded System
Events.
The AGC/ACC controllers are always either in Event mode,
or FCP mode. The controllers can never be in both modes
at once.
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hunter ACC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hunter ACC in the language / languages: English as an attachment in your email.

The manual is 7,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hunter ACC

Hunter ACC User Manual - German - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info