685908
32
Zoom out
Zoom in
Previous page
1/52
Next page
32 hunter.direct/ACC2help
Flow Operations
The two major parts of Flow Operations are the Flow
Manager, and the Flow Monitor.
Checking either will display a reminder of the steps for setting
these features up. Press the so key for Continue to setup the
selected function.
FLOW MANAGER
Flow Manager uses station ow information to run
simultaneous stations to reach a ow rate target that is
specied by the user. It will turn on as many stations as it
can to stay at or near the ow target until there are no more
stations to run. This does not require a ow sensor input.
FLOW MONITOR
Flow Monitor veries that actual ow matches the learned
ow for all running stations, and performs diagnostics or
shutdowns when alarms occur. Flow Monitor requires one or
more flow sensor inputs in order to operate, and at least one
Master Valve (P/MV) per ow sensor to be eective.
At the Flow menu, check the boxes to Enable Flow Manager
and/or Enable Flow Monitor if desired. Verify that all set up
information is exactly correct according to the following steps.
MAINSAFE
Enable MainSafe has its own check box. MainSafe is a special
function for higher level ow monitoring and mainline
protection.
Do not check the MainSafe box until the optional
feature is completely understood.
MainSafe requires a separate ow meter and master valve. It
is designed to protect longer runs of large diameter mainline
pipe that are upstream from the Flow Zones themselves. If
a mainline pipe experiences a high ow, or continues to ow
when all irrigation is suspended, MainSafe provides a rapid
shutdown response to prevent a prolonged serious leak.
MainSafe can also be congured to watch over separate,
always-on manual watering pipes, and provide an emergency
response if a break occurs.
Flow Operations
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hunter ACC-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hunter ACC-2 in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hunter ACC-2

Hunter ACC-2 Quick start guide - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info