Manual Humminbird SCP110 Course Computer (page 28 of 32) (English)

634397

Zoom out

Zoom in

1/32

Electro-Hydraulic and/or Linear Drive Unit

When the vessel is still moored, turn manually the helm to the center. In AUTO mode, execute a

course change of 10 / 20 degrees and check that the rudder moves in the correct direction and in

an intermediate position (the movement should be proportioned to the change).

NOTE: If the autopilot is configured to work without the feedback, you will see the rudder moving to the

hard-over position. A “NO RUDDER” alarm will also be displayed.

In case the rudder moves in the opposite direction, invert the wires of the motor (reversing power

unit) or invert the right and left solenoid connections (continuous running power unit).

GPS and/or Chartplotter

In these instruments, select the output data to the NMEA0183 standard (it usually is the default

configuration and no manual operation is required).

Plan a route on this instrument and verify that the autopilot receives correctly the bearing from

them by placing it on NAV mode.

Obviously, in NAV mode the autopilot will follow the course of the instrument connected to the

TB1 connector of the Course Computer, NAV1 input.

You may also connect a second GPS / Chartplotter on the TB1 connector, NAV2 input. In this case,

you should change the NAV2 FUNCTION to NAV2.

Wind Direction Sensor

Verify that the sensor is connected to the TB1 connector of the Course Computer, NAV2 input.

Select the output data to the NMEA0183 standard (this usually is the default configuration and no

manual operation is required) and verify that the autopilot receives the correct bearing of the wind

by pressing and releasing the NAV/TURN key until WIND mode is selected.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Humminbird SCP110 Course Computer in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Humminbird SCP110 Course Computer Manual

Product: