634396
8
Zoom out
Zoom in
Previous page
1/63
Next page
Installation
The SC 110 Autopilot includes hardware and a template to mount
the control head in the dashboard. You may also purchase gimbal
mount hardware and extension cables for your installation.
Contact our Customer Resource Center for details.
The SC 110 Autopilot control head connects to the SCP 110 Course
Computer (CPU) so that it receives input from the Fluxgate
Compass, Gyronav Rate Sensor, GPS receiver, and all connected
autopilot equipment.
WARNING!
The CPU and all related equipment should be
installed by a Certified Marine Electronics Technician
(CMET) or an authorized Marine Electronics Installer
(MEI). See NMEA.org for details.
1. Connecting the Control Head to the CPU
1. Turn off the power to the CPU.
2. Test route the power cable from the CPU to the
autopilot control head.
3. Remove the CPU cover and insert the cable through
the CPU strain relief for the correct terminal, and
proceed as follows:
Unit 1 (TB7): Remove the terminated block from
the TB7 Control Unit 1 connector. Insert the bare
wires of the Power/CPU cable into the terminated
block connector as shown in Inserting the Wires
into the Terminated Block.
Unit 2 (TB8): If you are connecting a second
autopilot (optional-purchase Remote SC 110
Control Head), remove the terminated block from
the TB8 Control Unit 2 connector. Insert the bare
wires of the Power/CPU cable into the terminated
block connector as shown in Inserting the Wires
into the Terminated Block.
2
Installation
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Humminbird SC 110 Autopilot at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Humminbird SC 110 Autopilot in the language / languages: English as an attachment in your email.

The manual is 6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info