Manual Humminbird PiranhaMax 160 (page 12 of 52) (English)

522297

Zoom out

Zoom in

1/52

Attaching the Control Head to the Base

Follow these steps to attach the control head to the already-assembled base:

NOTE: The transducer cable and power cable should be routed prior to securing the

mounting bracket to the deck.

1. Apply marine-grade silicone sealant to the drilled holes for the

mounting bracket.

2. Place the mounting bracket on the mounting surface, aligning with the

drilled holes.

3. Insert the four #8 Phillips countersink wood screws into the mounting

holes and hand tighten only!

4. Insert the thumbknob bolt through the pivot knuckle on the control head

(Figure 7).

5. Align the pivot knuckle with the mount base arms and slide into place,

twisting slightly if necessary, until the unit is firmly seated.

6. Rotate the control head to the desired angle and hand tighten the

thumbknob bolt.

7. Thread the gimbal knob onto the pivot bolt and tighten.

Pivot Knuckle

Gimbal Knob

Thumbknob Bolt

Figure 7

Mounting Holes

Control Head Installation

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Humminbird PiranhaMax 160 in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Humminbird PiranhaMax 160 Manual

Product: