Manual Humminbird PiranhaMax 150 (page 29 of 52) (English)

522296

Zoom out

Zoom in

1/52

Route the Cable

1. Once the mounting location is determined and you have marked the

position of the transducer, route the cable from the transducer to the

control head.

Permanently Mount the Transducer

1. Make sure the position of the transducer is marked.

2. You may have to disconnect the cable to the control head and

reconnect it at the end of this procedure.

3. Remove the water from inside the hull and thoroughly dry the

mounting surface. If the surface is excessively rough, it may be

necessary to sand the area to provide a smooth mounting surface.

4. Mix an ample quantity of two-part slow

cure epoxy slowly and thoroughly. Avoid

trapping air bubbles (Figure 30).

5. Coat the face of the transducer and the

inside of the hull with epoxy (Figures 28

and 30).

6. Press the transducer into place with a slight

twisting motion to purge any trapped air

from underneath, keeping the pointed end

of the transducer body pointed forward,

towards the bow (Figure 31).

NOTE: Proper operation requires the pointed end of

the transducer body to face towards the bow.

7. Weight the transducer so that it will not

move while the epoxy is curing.

NOTE: When the epoxy cures, no water is

necessary inside the hull.

8. If you unplugged the transducer cable at

the beginning of this procedure, plug it

back into the control head.

Your control head is now ready for operation.

NOTE:Neitherwater, spilled gasoline,noroilwill affecttheperformance ofthetransducer.

Figure 30

Figure 31

Inside the Hull Transducer Installation

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Humminbird PiranhaMax 150 in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Humminbird PiranhaMax 150 Manual

Product: