522288
33
Zoom out
Zoom in
Previous page
1/35
Next page
offered by Busse-Yachtshop.com
Reset. With the many User Options available to customize the 400TX, it is easy to configure the
unit in such a way that it is detrimental to a particular use. By using the Reset function, all variable
or user-controlled features of the 400TX are returned to the factory settings.
The Reset function is an important first step in troubleshooting problems to ensure that a user
selected setting is not the cause for the perceived problem.
USING THE DIAGNOSTIC FEATURE
The 400TX contains a powerful diagnostic tool that can aid in determining the
cause of a problem.
To use the Diagnostic feature, select the Diagnostic feature on the start-up
menu on the initial screen.
Self Test. Initially, the 400TX will perform a self-test.
This test confirms the operation of all internal circuitry.
At the conclusion of the test, one of two messages will
appear. "Passed" indicates the internal test
discovered no failures, "Failed" indicates a significant
internal problem was discovered and the unit requires
factory service. A code number appears that tells
repair personnel where the problem is.
Transducer. The first connection tested is Transducer
input. If a transducer is detected, "TriBeam" or "Wide
Side" appears. If a series of dashed lines is shown, no
transducer is connected or there is a problem with the
transducer or cable.
If you are using multiple transducers, switch between transducers to confirm the connections for
each.
Boat Speed/Water Temperature Connection. Other connections tested include the boat speed
and surface water temperature sensors. These accessory sensors can be purchased
independently or together as a single sensor (see the Humminbird Accessories catalog). If the
sensors are connected and working properly, a "connected" message appears.
The speed input feature only works when the boat is in motion as the paddle wheel on the speed
sensor must rotate to be detected.
Voltage Input. Another connection tested is the voltage input, and is especially helpful in
diagnosing input voltage problems. The current input voltage is displayed. If voltage fluctuations
or power supply in excess of 20 VDC or less than 10 VDC is suspected, use the diagnostic
screen to confirm input voltage. Often, small outboard motors do not effectively regulate voltage
when operated at high engine speeds.
Use Diagnostic while running the boat at high speeds to show the voltage gain. Also, if you are
using the 400TX in a portable configuration or from the trolling motor battery, Diagnostic can be
used to evaluate the health of the battery by showing the current voltage.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Humminbird 450TX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Humminbird 450TX in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info