522288
24
Zoom out
Zoom in
Previous page
1/35
Next page
offered by Busse-Yachtshop.com
the driver seat facing forward). Hollow fish symbols facing to the left are detected in the left beam,
and thus the fish is to the left side of the boat. Solid fish symbols represent fish in the single
center beam, and these fish are directly under the boat
CONTROL FUNCTIONS
The 400TX uses a simple six button keypad for all user input. Press any button
and an audible "chirp" confirms the control input. If a button has no function or is
inappropriate for the situation, an audible "error" is heard. The unit sounds multiple
chirps.
Power. The Power button powers the 400TX up for normal operation. When the
unit is on, POWER turns the unit off. POWER can also be used to go directly into
Simulator mode. To enter simulator, with the unit powered off, press and hold
POWER for several seconds until a continuous chirp is heard.
Light. LIGHT controls the unit's display backlight. With the unit powered on, press
LIGHT once to turn the backlight on "low." Press LIGHT a second time to turn the
backlight on "medium," a third time to turn the backlight on "high", and a fourth
time to turn the backlight off. The backlight is very effective for low-light and nighttime operation.
When the backlight is on, the 400TX will consume more power than with the backlight off. This is
important when using the 400TX in a portable configuration powered by a separate battery, or
when powering the unit from a trolling motor battery.
When powering the unit from a battery such as in
portable applications, you can prolong the battery life
by using the backlight at a minimum.
The three lower buttons, MENU, UP ARROW, and
DOWN ARROW work together to control the 400TX
menu-controlled user functions.
View. VIEW selects one of several screen
configurations or "views" possible depending on the
transducer in use. When using the standard 2 (Tri-
beam) transducer, without the optional speed/temp
sensor connected, the VIEW button toggles the
display between the full-screen 2D View and the
Large Digital Readout View.
The 2D View is the default view, and the view which
is first seen at power-up. Pressing VIEW again will
select the Large Digital Readout View, which
increases the size of key digital information so that it
can be viewed from a great distance. Normal 2D
information is displayed on the right side of the
display. Pressing VIEW again will toggle the display
back to the 2D view.
When using the standard (Tri-beam) transducer, with
the optional speed/temp sensor connected, the
VIEW button toggles the display between the full-
screen 2D View, the Chart View and the Large
Digital Readout View.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Humminbird 450TX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Humminbird 450TX in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info