522288
23
Zoom out
Zoom in
Previous page
1/35
Next page
offered by Busse-Yachtshop.com
Wave action also affects the bottom depiction. The information drawn is a distance measurement,
so if the boat is moving up and down over flat bottom, the bottom depiction often appears in
regular variations that match wave timing.
Structure. Structure is defined as any object physically attached to the bottom. The sonar
configuration of the 400TX is optimized to give the most accurate depiction of bottom structure
possible. Grass, trees, stumps, wrecks or other debris are accurately displayed, however the
depiction of these objects varies with boat speed and direction. The best way to learn to interpret
structure is to operate the 400TX over a variety of known conditions and experiment with user
functions to best represent those conditions on-screen.
Surface Clutter. Surface clutter is the layer of water
near the surface that is rich in algae and other
growth, and often is aerated by wind or wave action.
This area of water interferes with sonar transmission
and often appears on-screen as regular clusters of
individual dots near the "0" line.
Thermoclines. Thermoclines are sharp differences in
water temperature. These are easily identified by the
continuous nature of the return.
Second Returns. When a sonar signal is reflected off
the bottom back to the transducer, there is often
enough energy left in the signal to be reflected off the surface of the water back to the bottom a
second time. Second returns appear as a slightly weaker bottom representation exactly twice the
depth of the primary bottom return. The second return is most likely to occur in shallow water and
in areas of relatively hard bottom.
Fish ID. The 400TX uses advanced signal
processing to further evaluate any sonar return
between the surface and the bottom. For instance,
a small school of bait fish usually appears as a
dense cluster of individual dots. If the return meets
certain additional criteria, a fish symbol will be
assigned. There are three different size fish
symbols used to indicate the intensity of the sonar
return. While signal intensity is a good indicator of
relative fish size, different species of fish have
different sonar characteristics, so it is not always
possible to distinguish fish size between varying
species. The signal intensity is "normalized" for
depth so that a small fish close to the boat does
not appear as a large fish symbol.
ID+ adds an additional piece of information to help the user locate fish. On selected fish symbols,
the digital depth of the designated fish is drawn to help locate the fish vertically. This is especially
helpful in setting bait depths or for downrigger operation.
The specific fish symbol indicates the type of sonar beam the fish is detected in. This gives you a
reliable indicator of side to side location relative to boat movement. Fish symbols which are
hollow are detected in the outside two beams. Hollow fish symbols facing to the right are in the
right beam and therefore are to the right side of the boat (as viewed from
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Humminbird 450TX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Humminbird 450TX in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info