522286
24
Zoom out
Zoom in
Previous page
1/28
Next page
offered by Busse-Yachtshop.com
Units Depth/Speed. Only available on metric versions, the Units Depth/Speed function
allows the user to select the units of measurement for the depth and speed readout.
MTR/KPH (meters/kilometers per hour), MTR/KTS (meters/nautical miles per hour),
FEET/MPH (feet/statute miles per hour) and FEET/KTS (feet/nautical miles per hour),
are available. The 300TX remembers this selection even when the unit is powered off.
Fish ID. There are three selections available: Off, ID+ ON, and Adjust. The factory
setting is ID+ ON. With Fish ID Off, sonar returns are displayed as “raw” information.
There is no interpretation made by the unit. Selecting ID Off also disables the fish
alarm.
ID+ On enables the 300TX to interpret the raw sonar data and, using a
variety of techniques, depict appropriate target returns as one of three
different size fish symbols. Further identification shows whether the
fish is in the wide or narrow beam. The 300TX also displays the depth
beneath the surface with the corresponding fish symbols.
Increasing the value to a number greater than zero shows more fish symbols on-screen.
In this case smaller sonar returns will be depicted as fish symbols. This is useful for
identifying many smaller sonar returns (such as baitfish) as fish symbols.
Decreasing the value to a number less than zero shows fewer fish symbols on-screen.
In this case smaller sonar returns are disregarded. This is useful for eliminating many
small sonar returns when seeking larger species of fish.
The 300TX remembers this selection even when the unit is powered off.
Numeral Size. Two options are available: Big and Small. The factor setting is Big.
With this setting, the digital depth and speed and temp numerals are drawn large
enough to be read from across the boat. The big numerals occupy space on the display
that could be used for the graphics area. Hence, the small numerals options. With
small numerals selected, a greater amount of the display area is available for the
graphic view. This effectively increase the display resolution of the unit.
Numeral size settings are remembered when powered off.
Transducer. The Transducer Option controls the 300TX’s ability to determine the
transducer or wide side transducer, no adjustment to this menu is needed unless the
transducer develops a fault, which is a rare occurrence. The factory setting for the
Transducer menu is “Auto”. The Transducer menu selections will be remembered when
the 300TX is turned off.
If a faulty transducer is connected, the 300TX may not change the screen presentation
to match the transducer. In this instance, you may need to manually select “Tri-beam”
for the tri-beam transducer or “Side” for the WideSide transducer.
Often a transducer switch is used to connect two tri-beams transducers, or a tri-beam
and a wide side to the 300TX. In “Auto” the 300TX identifies the transducer as the
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Humminbird 350TX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Humminbird 350TX in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info